Page 2
Cyrus CD7 OUTPUT1 OUTPUT1 OUTPUT2 OUTPUT2 OUTPUT1 OUTPUT1 OUTPU OUTPUT2 OUTPUT2 OUTPUT DIGITAL DIGITAL MC-BUS MC-BUS C-BUS P R E C I S I O N P R E C I S I O N PSX-R PSX-R DIGITAL DIGITAL ONLY...
RETAIN INSTRUCTIONS: The safety and operating instructions should be The mains supply requirement for your CD7 is marked on a label on the rear retained for future reference. panel. Before connecting, check that this voltage is the same as your mains FOLLOW INSTRUCTIONS: All operating and use instructions should be supply.
Warranty Card (with instruction manual) When power is applied, the STANDBY key g is used for power control. AC Mains Cable The Standby light h shows red when the CD7 is in Standby and green Remote Control Handset when operational.
The CD7 has two program modes – Program and Exclude. Program sets 27. Select Play ................Cyrus CD7 the CD7 to play the sequence of tracks you like, Exclude sets the CD7 to 28. Select Pause................Cyrus CD7 skip the tracks you don’t like. To set the CD7 to Program or Exclude a selection of tracks, follow this sequence- 29.
User Instructions TROUBLESHOOTING GUIDE Laser Product If your CD7 is not operating properly, disconnect the power and check all This label on the rear panel tells connections using the notes in this handbook. If problems persist, the you that the unit contains a Laser checklist below may help.
Need help?
Do you have a question about the CD7 and is the answer not in the manual?
Questions and answers