Symbols - Homelite UT34020 Operator's Manual

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME
V Volts
A Amperes
Hz Hertz
W Watt
min Minutes
Alternating Current
Direct Current
n No Load Speed
0
Class II Construction
.../min Revolutions or Reciprocation Per Minute
Safety Alert Symbol
Wet Conditions Alert
Read Your Operator's Manual
Wear Eye, Hearing, and Head Protection
Wear Safety Footwear
Wear Gloves
Moving Parts
Keep Children and Pets Away
Risk of Electrocution

SYMBOLS

SAVE THESE INSTRUCTIONS
6
EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type or a characteristic of current
Type or a characteristic of current
Rotational speed, at no load
Designates Double Insulated Construction tools
Revolutions, strokes, surface speed, orbits
etc. per minute
Indicates danger, warning or caution. It means
attention!!! Your safety is involved.
Do not expose to rain or use in damp
locations.
Your manual contains special messages to
bring attention to potential safety concerns,
machine damage as well as helpful operating
and servicing information. Please read all the
information carefully to avoid injury and ma-
chine damage.
Wear eye protection which is marked to comply
with ANSI Z87.1 as well as hearing and head
protection when operating this equipment.
Wear non-slip safety footwear when using this
equipment.
Wear non-slip, heavy-duty protective gloves
when handling the pruner.
Keep hands away from moving parts.
Danger- Keep children and pets away.
DANGER! Risk of electrocution! Keep all
bystanders at least 50' (15 m) away.