DreamGEAR 18-in-1 Starter Kit User Manual

mini Speaker System: Install 3 "AAA" batteries into the mini Speaker
System. Place your PSP onto the mini Speaker System. Connect the mini
3000 2000
&
Speaker System's 3.5mm audio cable to your PSP's headphone input.
Screen Faceplate: Insert the two screws on top of the screen guard into
the PSP and screw in tightly.
Car Charger: Connect the car charger to your PSP game consoles DC
input. Plug the car charger into your car's power outlet. Your PSP will begin
charging automatically.
Emergency Battery: For on the go power, place 4 "AAA"batteries into the
battery compartment of the emergency power pack. Connect the
emergency power pack to your PSP's AC adapter input.
Carrying Case: The carrying case is designed to store and protect your
PSP console.
Earbuds: Connect the earbuds to your PSP game console's headphone
input.
Transparent Screen Guard: Place the screen guard over your PSP's
screen.
Audio Splitter: Connect the Audio Splitter to your PSP's headphone input.
Power/Data Cable: To sync data and charge your PSP, connect the
Power/Data cable to your PSP's data port, connect the other end to your
PC/MAC USB port. For faster charging times you can charge your PSP
using the DC jack located on the Power/Data cable. Connect the DC Jack
to your PSP and the other end to any powered USB input. For detailed
data/sync instructions, please refer to your PSP's instruction manual.
UMD Cases: The UMD cases are designed to store and protect UMD
movies and games.
Cleaning Cloth: Use the Cleaning Cloth to clean your PSP's screen.
Wrist Strap: The Wrist Strap can be used on the Protective Carry Case or
on your PSP game console.