Initialization; Installing Sd Card - Ectaco jetBook–Lite User Manual

ECTACO jetBook
®

Initialization

In the rare event that the data on the screen is corrupted or a
program is not responding properly, you will need to perform a
reset. The Reset button is located on the back of the device. It
can be accessed with any thin object like a paper clip. Never
use a needle or a sharp pin for this purpose since it can damage
the device.
• After pressing the Reset button, press and hold the On/Off
button for 3 seconds to turn the device on.
ECTACO jetBook
®
storing thousands of books.
• Unfasten the SD slot cover.
• If the card is not installed, slide it into the slot – the contacts
of the card positioned towards the battery compartment, label
positioned towards the device screen. Push the card gently
until it clicks into place.
• To eject the card, just push it in slightly.
www.mindconnection.com
– Lite
®

INSTALLING SD CARD

– Lite supports SD and SDHC cards for
®
11
User Manual