Acoustic Research Xsight uno Owner's Manual page 15

Settings
Device Setup
Learning
Volume Control
Learning
For which device?
New Device
TV
Cable Box
Learning
Point the original
remote towards
the top lens and
press the key you
want to learn.
Learning a New Function
1. Select Learning from the Settings menu.
2. Select the device you want to use the function with.
NOTE: If you don't see the device you want, press the
down arrow key to scroll through more device pages
3. Select the key on the Xsight™ Uno you want to learn
onto—either a physical key or an on-screen soft key (press
On-Screen keys to choose a soft key).
NOTE: You can Learn onto any physical or on-screen
key except for the shortcut keys for Home, Favorites,
Activities, and Devices.
4. Locate the remote for the device you want to learn
from. Align the top of the source remote with the top
end of the Xsight™ Uno, no further than 5 inches apart,
preferably between 2 and 5 inches (5cm and 12cm).
5. On the remote you are learning from, press the key you
want to learn.
NOTES: If the function is not learned correctly, the
Xsight™ Uno screen displays an error message. Select
Yes to try learning again, or No to exit to the Settings
menu.
If the key you are learning the function onto already
has a function, you will be asked if you want to
overwrite it.
Settings
continues on next page...
15