Hama Ultimate Adapter Quick Manual page 4

00034384bda 05.07.2006 7:48 Uhr
- Now press the button "ALT" and alternatively the button 1-9.
- The LED goes out and the value is stored.
3.2 Quiet zone / deadzone setting:
It depends on the game how far you have to press the analogue stick of your controller in one directi-
on before you can see a reaction on the screen. This minimal and short period of time during which an
action is not yet carried out although you move your analogue stick is called quiet zone (deadzone).
You can configure this stroke sensitivity as well and store it in the complete configuration.
- Press the button "ESC" and the red programme LED flashes slowly.
- Now press the button "0-9" (0 = no quiet zone to 9 = big quiet zone ).
- The LED goes out and the value is stored.
The majority of the games function with a value between 3-5.
3.3 Inverting of the mouse:
Inverting of the y-axis of your mouse (up/down):
Activate:
- Press the button "ESC" and the red programme LED flashes slowly.
- Press the button "END" and the red programme LED goes out.
Deactivate:
- Press the button "ESC" and the red programme LED flashes slowly.
- Press the button "POS1" and the red programme LED goes out.
3.4 Exchanging the analogue stick functions (X & Y axes ):
The right analogue stick of the controller is normally used for aiming/looking around, the left one for
moving the game figure. However, so-called Lightgunshooters like Silent Scope® use the left analogue
stick for moving the cross hairs. The following combination determines therefore to which analogue
stick the mouse movement is applied.
Mouse movement (left stick)
- Press the button "ESC" and the red programme LED flashes.
- Press the button "Picture Up" and the LED goes out.
Mouse movement (right stick)
- Press the button "ESC" and the red programme LED flashes.
- Press the button "Picture Down" and the LED goes out.
Notice:
®
"PS2 Ultimate Converter has digital/analog mode function same as the function of the joypad. As the
converter is in digital mode, the left stick (Standard Konfiguration: W, A, S, D) and right stick (Standard
Konfiguration: I, M, J, L / mouse move) will be non functioned. Press "ESC" add "INSERT" buttons to
swich the mode to become analog mode to get the function back."
Seite 8
6
4. Tables
4.1 Standard Konfiguration (PS2)
Controller Keyboard Mouse
Left Stick W,A,S,D
Right Stick I,M,J,L Mouse Move
X SPACEBAR
O E
® R
r Z
L1 T Left Button
R1 F Right Button
L3 Y
R3 G
Start ENTER
SELECT BACKSPACE
L2 B
R2 CAPS LOCK
D-Pad UP ·
‚
D-Pad Down
D-Pad Left fl
D-Pad Right ‡
4.2 Different setting possibilities (PS2)
PS2 Controller Keyboard
(controller map keys)
r V
Ü
®
X X
° O
L1 A
L2 S
L3 D
R1 L
R2 K
R3 J
Select BACK SPACE
Start Enter
Up ·
Down ‚
Left fl
7
PS2 Controller Keyboard
(controller map keys)
Right
‡
Left Stick Up Left ALT+·
Left Stick Down Left ALT+‚
Left Stick Left Left ALT+ fl
Left Stick Right Left ALT+ ‡
Right Stick Up Right ALT+·
Right Stick Down Right ALT+‚
Right Stick Left Right ALT+ fl
Right Stick Right Right ALT+ ‡