Advertisement
Important Notes
· When the device records its maximum available tests, '500' and
'MAX TEST' will display and flash on the LCD. Users will need to
refresh/calibrate the device so that the device can take a test with
correct result reading. 'MAX TEST' will display and blink each time
when you enter into the test mode of the device. To continue testing,
you will have to wait for 5 seconds. To discontinue the display of
"MAX TEST", you will need to visit an authorized service center and
calibrate your equipment.
· When unused for a long time or at a low temperature, the machine
will take longer to prime itself / warm up.
· After 5 consecutive tests, allow the device to rest for 5 minutes.
· Please store in a dry environment at room temperature. Avoid
extreme heat or long-term sun exposure.
· When the battery indicator flashes, please replace the batteries.
· If the difference between two successive readings is >0.1%, the user
should test again.
· D o NOT block the outlet during sampling.
· When "Err" flashes, press 'OK' to restart the test. The device will
revert to "ALCO" mode once "Err" flashes for 5 seconds.
Advertisement
