Introduction Congratulations! Your Home Theatre Master Remote (HTMR) is a state-of-the-art device which integrates many different infrared remote controls to deliver instant A/V action to your fingertips. We hope that you love this remote and take it as your Personal Digital Assistant for your Home Theatre system.
1.3 Specifications Operation System: Integrated preprogrammed & learning infra-red remote control system Compatibility: Preprogrammed with code library of Televisions (TVs), Video Cassette Recorders (VCRs), Satellite Receivers (SATs), Cable Converters (CTVs) and Digital Video Disc Players (DVDs) Memory Capacity: 120 learning commands Memory Retention after Battery Disconnection:...
Page 4
How to Set Up the Home Theatre Master Remote 3.1 By Entering Device Code You may setup the remote by the following code entering instructions. 1. Refer to the Device Code List, look up the 4-digit device code which corresponds to the brands of your A/V equipment.
– Each time you press the “ the next code and send out a POWER signal trying to turn off your device. If you failed to stop pressing “ device has been turned off, turn on your device again immediately. Before the indicator goes out, press “ on the HTMR to skip backward.
Operating the Remote 5.1 Normal Operation Once you have setup the remote for your A/V equipment, it works like your original remote controls. To operate, just aim it at your equipment, press an appropriate device mode key and invoke the desired function by pressing a corresponding key on the remote.
Q. My A/V equipment responds only to some of the commands. A. You have set a code for which only some commands work properly but some do not. Try other codes until most keys work properly. A. You can also copy from the original A/V remote. See “ to Set Up Your HTMR (Learning Commands) ”.