Firmware Upgrade Procedure; Equipment Needed; Hardware Setup Procedure - Optoma EP719 Service Manual

Chapter 5

Firmware Upgrade Procedure

5-1

Equipment Needed

Software :
- DLP Composer
- EP719 /EP716 Firmware
Hardware :
- Power Cord
- USB Cable
- PC or Laptop
- EP719 /EP716 Projector
(The file name of the Firmware Code depends on the individual Model Version.
The following Pics is based on EP719.)
5-2

Hardware Setup Procedure

1. Connect USB Cable of PC to USB port of EP719 Projector.
USB Cable
USB Cable
EP719 / EP716 / EP719R / EP716R /
5-1
EP719P / EP716P