Download Print this page

Audiovox WHS250 Installation Instructions page 2

Low profile two channel automotive infrared stereo headphone system

Advertisement

Fig. 3
SIDE VIEW
IR Transmitter
1. Plug wire harness into transmitter.
2. Fasten transmitter to headliner using two short screws (make sure that screws do not puncture metal of roof).
3. Install the two plastic covers to conceal the mounting screws.
Wireless headphones
1. Follow directions in owner's manual for proper operation.
© 2002 Audiovox Corp., Hauppauge, N.Y. 11799
IN-CAR TRANSMITTER
ALWAYS FACE LEDs TOWARDS REAR OF VEHICLE
TOP VIEW
CEILING OF THE CAR
128-6498

Advertisement

loading