Disassemble Lvps; Disassemble Bottom Shielding - Optoma HD65 Service Manual

2-24 Disassemble LVPS

Module
1. Unscrew 3 hex screws(as red circle)
2 screws(as yellow circle) and 1 screw
(as blue circle) to disassemble the LVPS
Module.
Note: - When you disassemble the Iron Cut,
you should use tweezers to raise it up,
from the hook.
- You should make the raised-dots side
of Iron Cut face to inner of the unit
when assemble it. (as red dot square).
2-25 Disassemble Bottom
Shielding
1. Unscrew 1 hex screw (as blue circle) and
1 screw(as red circle) on the bottom cover,
disassemble the Bottom Shielding.
Iron Cut
HD65/GT-7000/HD700X Confidential 2-