HAI UPB 60A00-1 15A Installation And Operating Instructions

Appliance module

Table of Contents

Download this manual

For the following Models:

60A00-1 HAI 15A Appliance Module

READ THESE INSTRUCTIONS BEFORE INSTALLING DEVICE

This HAI UPB™ Appliance Module is intended for installation in accordance with the National Electrical Code and local codes and

regulations. Retain these instructions for reference.

This product is for indoor use only.

HAI UPB™ Appliance Module Overview

The HAI UPB™ Appliance Module (Figure 1) is a plug-in device that incorporates the UPB™ two-way powerline communication

technology, which gives it the ability to be remotely controlled by UPB™ compatible controllers. The Appliance Module has one

UPB™ controllable outlet that can sense the load's local on/off switch (switch trigger) to turn the load on even after it was turned off

using UPB™ control.

Note: The switch trigger feature is disabled by default; it may not work for all types of loads (e.g. fluorescent lighting loads).

The HAI UPB™ Appliance Module is also capable of transmitting UPB™ messages when the local load switch is used to turn the

load on or off.

Each appliance module can be configured to custom fit an individual's lifestyle and desires.

HAI UPB™ Appliance Module

Installation and Operating Instructions

Pushbutton

UPB Controlled

Outlet

Figure 1 - HAI UPB™ Appliance Module

LED

60I00-1, Rev A

Table of Contents

Need help?

Do you have a question about the UPB 60A00-1 HAI 15A and is the answer not in the manual?

Page 1 UPB™ compatible controllers. The Appliance Module has one UPB™ controllable outlet that can sense the load’s local on/off switch (switch trigger) to turn the load on even after it was turned off using UPB™...
Page 2 Switch Trigger Operation The Appliance Module can be configured to sense the load’s local on/off switch (switch trigger) to turn the load on even after it was turned off via UPB™ control. By default, the Appliance Module has the switch trigger operation disabled.
Page 3: Specifications
SPECIFICATIONS Motor Load Maximum ½ HP Current Maximum Non-Dimming Connections Standard receptacle LED Indicator Dimensions 3” x 2” x 1.3” Weight 0.25 lb. Mounting Plug-in Input Power 120 ± 12 VAC Input Frequency 60 ± 3 Hz Operating Temperature -40 °F to 104 °F LIMITED WARRANTY HAI warrants this product against defects in material and workmanship, under normal use and service, for a period of two (2) years from the date of purchase.

Upb 60a00-1