Advertisement
DESCRIPTION
Zone Amplifier Cards (ZAC) can be added at any time to increase the total number of zones to eight.
INSTALLATION
To install a Zone Amplifier Card:
1) Power down the Hi-Fi system by unplugging
both Power Supply units (if applicable) from the
inputs labeled "Power" on the Hi-Fi Main
Assemble.
2) Pull upward on each of the 4 plungers until you
hear them snap
Home Automation, Inc.
Model 62A02-1 Hi-Fi Zone Amplifier Card (ZAC)
PLUNGER
PLUNGER
3) Remove the cover from the Hi-Fi Main Assembly
by
lifting
it
away
Hi-Fi circuit board.
PLUNGER
PLUNGER
from
the
62I02-1
Advertisement
Table of Contents
Summary of Contents for Home Automation 62A02-1
- Page 1 “Power” on the Hi-Fi Main Assemble. 2) Pull upward on each of the 4 plungers until you hear them snap Home Automation, Inc. Model 62A02-1 Hi-Fi Zone Amplifier Card (ZAC) PLUNGER PLUNGER 3) Remove the cover from the Hi-Fi Main Assembly Hi-Fi circuit board.
- Page 2 4) Install additional Zone Amplifier Cards in an empty connector (CN5-CN8) by positioning the Zone Amplifier Card directly over the connector and gently but firmly pushing down on both sides of the card until the top and bottom are securely seated into the connector.
Need help?
Do you have a question about the 62A02-1 and is the answer not in the manual?
Questions and answers