Panasonic WR-DA7 Application Manual page 19

Hide thumbs Also See for WR-DA7:

Table of Contents

To accomplish MMC operation, the MIDI channel of the WR-DA7 and the MIDI channel of the BRC

must be set to the same channel. On the BRC, obtain a display of 11: MIDI Device screen by

MIDI/UTIL setting. Set the value of 'MIDI channel set for the WR-DA7 - 1.' Otherwise, the settings

should be made to 'ALL.'

BRC setting (BRC as the wordclock slave)

When using a BRC and ADAT with the DA7, it may be necessary to sync the BRC to the DA7's inter-

nal wordclock generator.

1. Connect a 75 ohm (BNC) wordclock cable from the DA7's wordclock output to the BRC's 48

kHz input.

2. Press the EDIT then EXTERNAL sync buttons on the BRC and using the arrow keys, select 48

kHz INPUT.

3. Press the EDIT button to go back to normal operation. Make sure the EXTERNAL sync button

is enabled (the button lights green).

Table of Contents

Show Quick Links

Table of Contents