NPB-250 INSTRUCTION MANUAL MP3/CD PLAYER WITH AM/FM STEREO RADIO AND USB/SD/MMC INPUTS Please read and follow these instructions before using your unit.
Dripping Warning: The product shall not be exposed to dripping or splashing LOCATION OF CONTROLS and no items filled with liquid like a filled glass or vase or cup, shall be placed on 1. VOLUME CONTROL 15. SPEAKERS the product. 2.
Page 4
15. This figure is the elapsed minutes of the track played. NOTES: 16. This figure is the elapsed seconds of the track played. If a particular FM (STEREO) station is weak, or you hear too much 17. English Text display. The information of the current track is displayed background noise, try moving the band selector switch to the FM (MONO) scrolling forward in MP3 playback.
Page 5
SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY PROGRAMMED PLAY 1. Press once the SKIP/SEARCH up button in music play to skip to the next Programmed play is that tracks on the disc can be edited for playback in a track.
Page 6
REPEAT A SINGLE TRACK Press PLAY/PAUSE button to begin programmed play in the preferred order To repeat a preferred track in playback, press MODE button once, "REPT 1" after you are done with programming. The player stops automatically after all shows in the LCD.
Page 7
INTROSCAN PLAY Press MODE button for the fifth time in play mode to activate introscan playback immediately; the player will pick up tracks for playback of the first 10 seconds of each track in a sequential order after PLAY/PAUSE button is pressed. You may press MODE button once again to exit introscan play mode and return to normal playback from the track it's arrived at.