Removal steps of PCI Express Mini Card for wireless LAN
Disconnect the cable from the card using the removal tool antenna RF connector (P/N: 08K7159) or pick
up the cable with your fingers and then gently disconnect it from the card in the direction of the arrow
1
. Then remove the screw
Step
Screw (quantity)
2
M2 × 3 mm, flat-head, nylon-coated (1)
Remove the card in the direction shown by the arrow
When installing: Plug the black cable (MAIN) into the jack labeled A, and the white cable (AUX) into the jack
labeled B on the card.
1070 Backup battery
•
•
2
.
3
.
.
Chapter 7
Removing and replacing a FRU
49