Krell Industries PHANTOM User Manual page 13

(SECTION TWO: Unpacking and Placement continued)
Placement
Before you install an Phantom preamplifier into your system, please follow the
guidelines in this section to select a location for your component. This will facili-
tate a clean, trouble-free installation.
The Phantom preamplifier does not require a special rack or cabinet for installa-
tion. The preamplifier chassis measures 17.3 in. (43.8 cm) wide, 3.8 in. (9.7 cm)
high, and 18.3 in. (46.4 cm) deep.
The Phantom preamplifier requires at least two inches of clearance on each side,
and at least two inches of clearance above the component to provide adequate
ventilation. Installation inside cabinetry may require additional ventilation.
AC Power Guidelines
The Phantom preamplifier has superb regulation and does not require a dedicated
AC circuit. Avoid connections through extension cords or multiple AC adapters.
High quality 15 amp AC strips are acceptable. The use of AC line conditioning
devices is not recommended. The features provided by these devices are already
incorporated into the Phantom power supply.
13