1. Manuals
  2. Brands
  3. Abocom Manuals
  4. Computer Hardware
  5. LA100
  6. Quick installation manual

Abocom LA100 Quick Installation Manual

10/100mbps dual speeds fast ethernet pc card
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
10/100Mbps Dual Speeds
Fast Ethernet PC Card
Quick Installation Guide

Advertisement

Table of Contents
loading

Related Manuals for Abocom LA100

Summary of Contents for Abocom LA100

  • Page 1 10/100Mbps Dual Speeds Fast Ethernet PC Card Quick Installation Guide...

  • Page 2: Hardware Installation

    HARDWARE INSTALLATION 1. Locate the PCMCIA slot of your system. 2. Align the PCMCIA Fast Ethernet Attached Port PC Card toward the PCMCIA slot. Push evenly and steadily until it is seated. 3. Connect the attached RJ-45 port with an Ethernet Hub/Switch.

  • Page 3: Led Indicators

    LED Indicators • 100M/FULL: grows orange at 100 Mbps, green at FULL duplex. • LINK/RX: grows green when connected to the network, blinks green when receiving datum. • POWER/TX: grows green when power is on, blinks green when transmitting datum. - 2 -...

  • Page 4: Software Installation

    SOFTWARE INSTALLATION Windows NT 3.51 1. In Main Group of NT 3.51, open Control Panel and click on Network icon. 2. In Network Settings dialog box, push Add Adapter... button. The Add Network Adapter dialog box will appear. 3. Choose manufacturer from the network adapter card list and press Continue..

  • Page 5: Windows 95 Installation

    11. A dialog box will appear to adjust the driver's settings. The resources assignment to the adapter must be unique in the system. 12. Press OK when all setting are completed. 13. Press Close to complete network setting Windows 95 Installation 1.Assumed that the drivers of PC Card slot are well installed.

  • Page 6: Windows 98 Installation

    5.Reboot the machine and the card will be fully functional. Windows 98 Installation 1. Assumed that the drivers of PC Card slot are well installed. The System Icon in the Control Panel can report on its functionality. Apart from above mentioned, any questions on this layer need to be taken up with the computer's manufacturer.
  • Page 7 5. Windows HARDWARE WIZARD dialog box. In this time, select Floppy disk drives and please driver diskette. Then press Next, the driver will be installed and you may be asked for the original Windows 98 CD/disks. 6. For the first time installation, please click Network icon in Control Panel to add Protocols, Client and Service if you needed.

  • Page 8: Windows 2000 Installation

    Windows 2000 Installation 1. Assumed that the drivers of PC Card slot are well installed. The System Icon in the Control Panel can report on its functionality. Apart from above mentioned, any questions on this layer need to be taken up with the computer's manufacturer.
  • Page 9 5. Windows will prompt a Locate Driver Files dialog box. In this time, select Floppy disk drives and please insert driver diskette. Then press Next, the driver will be installed and you may be asked for the original Windows 2000 CD/disk.
  • Page 10 6. For the first time installation, please click Network icon in Control Panel to add Protocols, Client and Service if you needed. 7. Reboot the machine and the card will be fully functional. Installation for Windows Workgroup 3.11 NDIS3 Driver for Workgroup 1.
  • Page 11 installation and exit Windows. 9. Run INSTALL.EXE from driver diskette's root directory. 10. Select "Windows for Workgroup" in "Network Operating System" screen and enter "Driver Install" screen. 11. If current settings are acceptable, select "Start Installation" and go to step 13. Otherwise, select "Modify Parameters"...
  • Page 12 3. In Networks dialog box, check the radio button before "Install Microsoft Windows Network" and "No Additional Network". Press OK to go back the Network Settings screen. 4. Click on "Drivers..." button to select network driver. 5. In "Network Drivers" dialog box, press "Add Adapter..."...
  • Page 13 Back to step 11. 13. Select "NDIS Server(LAN Manager,...)" as the network server you will attach to and press Enter key. 14. Installation program starts copying related files from diskette to the destination directory and modifies AUTOEXEC.BAT and NET.CFG under user's agreement. 15.

  • Page 14: Novell Netware

    7. Select the "Netware ODI Driver ..." string and press OK. 8. Follow Windows instructions to complete the installation and exit Windows. 9. Run INSTALL.EXE from driver diskette's root directory. 10. Select "Windows for Workgroup" in "Network Operating System" screen and enter "Driver Install"...
  • Page 15 directory. 2. Select "Netware 3.x or 4.x workstation" in "Network Operating System" screen and enter "Driver Install" screen. 3. If current settings are acceptable, select "Start Installation" and go to step 5. Otherwise, select "Modify Parameters" to make settings changed. 4.
  • Page 16 >LSL >LE100ODI ; Hardware Specific Module >IPXODI >NETx >LOGIN Novell Client Installation 1. Run the NetWare Client Install v1.21- Get the 4 Client disks from the network administrator or Run the \NWCLIENT\INSTALL.EXE in a previous installation 2. A message appears on the screen asking you whether or not you want the program to perform modifications on your AUTOEXEC.BAT and CONFIG.SYS files.
  • Page 17 backup by a NetWare server running software such as SBACKUP? (Y/N): No 7. Answer accordingly and provide a path if necessary. 8. Select a driver for your network board. 9. From the driver list, select "Other Drivers". 10. Go to the Insert the Driver Disk dialog box and specify the path where the ODI driver and INS files reside.
  • Page 18 performs the following: SET NWLANGUAGE=ENGLISH --Set NetWare 4.X to English language LE100ODI IPXODI LOGIN .ADMIN 16. Run STARTNET to access the Novell network. MS LAN Manager 1.View the README.TXT on the installation diskette in the \NDIS2 directory. Before installing the drivers, please ensure that the Microsoft LAN Manager has been installed in the target path.
  • Page 19 Installation and go to step 6. Otherwise, select Modify Parameters to make setting changed. 5.Move cursor to each field you want to make a change and press <Enter> to select a fit value. When the configuration are set completely, press <Enter> on the OK field to exit the screen and go back to step 4.

  • Page 20: Packet Driver

    Drivername = netbeui$ SESSIONS = 6 NCBS = 12 BINDINGS = "LE120NDS_NIF" LANABASE = 0 [LE120NDS_NIF] ; protocol.ini session for LAN driver. IOADDRESS = 0x320 INTERRUPT = 11 DRIVERNAME = LE100NDS$ Packet Driver 1.Run INSTALL.EXE from root directory of driver diskette. 2.Select Packet Driver item on the menu screen.

Table of Contents