Osd Button; Dolby Mode Selector; Dts Digital Mode Selector; Transport Controls - Harman Kardon AVR335 Service Manual

AVR335
MAIN REMOTE CONTROL FUNCTIONS
been pressed so that AUTO appears in the on-
screen menu and Lower Display Line
and holding either of the buttons for 3 seconds will
cause the tuner to seek the next station with acceptable
signal strength for quality reception. When MANUAL
appears in the Lower Display Line ¯
buttons will tune stations in single-step increments. (See
page 31 for more information.)
v OSD Button: Press this button to activate the
On-Screen Display (OSD) system used to set up or
adjust the AVR 335's parameters.
w Dolby Mode Selector: This button is used to
select from among the available Dolby Surround pro-
cessing modes. Each press of this button will select
one of the Dolby Pro Logic II modes or Dolby 3
Stereo. When a Dolby Digital-encoded source is in use,
the Dolby Digital mode may also be selected. (See
page 29 for the available Dolby surround mode
options.)
x DTS Digital Mode Selector: When a DTS-
encoded digital source is selected, each press of this
button will scroll through the available DTS modes. The
specific choice of modes will vary according to whether
or not the source material contains DTS-ES 6.1
Discrete encoding. When a DTS source is not in use,
this button has no function. (See page 29 for the avail-
able DTS Digital options.)
y Logic 7 Mode Select Button: Press this button
to select from among the available Logic 7 surround
modes. (See page 29 for the available Logic 7
options.)
z Skip Up/Down Buttons: These buttons do not
have a direct function with the AVR 335, but when
used with a compatibly programmed CD or DVD
changer they will change to the previous disc in the
changer or carousel.
` Transport Controls: These buttons do not have
any functions for the AVR 335, but they may be
programmed for the forward/reverse play operation
of a wide variety of CD or DVD players, and audio
or video cassette recorders. When the remote is
used to control the AVR, the VID2/TV device or the
VID3/CBL/SAT device, these buttons are programmed
to operate the DVD player's transport controls.
However, you may use the Transport Control Punch-
Through feature described on page 39 to program
these button to operate another device's transport
controls when the AVR, VID2 or VID3 device has been
selected.
Stereo Mode Select Button: Press this button
to select a stereo listening mode. When the button is
pressed so that DSP SURR OFF appears in the
Lower Display Line ¯ , the AVR will operate in a
12 12 MAIN REMOTE CONTROL FUNCTIONS MAIN REMOTE CONTROL FUNCTIONS
bypass mode with true, fully analog, two-channel
left/right stereo mode with no surround processing or
¯ , pressing
bass management, as opposed to other modes where
digital processing is used. When the button is pressed
so that SURROUND OFF appears in the Lower
Display Line ¯
, pressing these
entation of the sound along with the benefits of bass
management. Depending on whether your system is
configured for 5.1 or 6.1/7.1 channels, the next press
of the button will cause either 5 CH STEREO or
7 CH STEREO to appear, and the stereo signal
will be routed to all five (or seven) speakers. (See
page 29 for more information on stereo playback
modes.)
DTS Neo:6 Mode Select: Press this button to
select a DTS Neo:6 mode. These modes take a two-
channel stereo- or matrix surround-encoded source
and create a full five-, six- or seven-channel sound
field. (See page 29 for the available DTS Neo:6
options.)
Macro Buttons: Press these buttons to store or
recall a "Macro" , which is a preprogrammed sequence
of commands stored in the remote. (See page 37 for
more information on storing and recalling macros.)
Disc Skip Button: This button has no direct
function for the AVR 335 but is most often used to
change to the next disc in a CD or DVD player when
the remote is programmed for that type of device.
When the remote is used to control the AVR, the
VID2/TV device or the VID3/CBL/SAT device, these
buttons are programmed to operate the DVD player's
transport controls. However, you may use the Transport
Control Punch-Through feature described on page 39
to program these button to operate another device's
transport controls when the AVR, VID2 or VID3 device
has been selected. (See page 38 for more information
on using the remote with products other than the
AVR 335.)
Preset Up/Down: When the tuner is in use,
press these buttons to scroll through the stations
programmed into the AVR 335's memory. When
some source devices, such as CD players, VCRs and
cassette decks, are selected using the device Input
Selectors e, these buttons may function as
Chapter Step or Track Advance.
Clear Button: Press this button to clear incorrect
entries when using the remote to directly enter a radio
station's frequency.
Memory Button: Press this button to enter a radio
station into the AVR 335's preset memory. First, tune
the desired station, and then press this button. Two
underline indicators will flash at the right side of the
Upper Display Line ˜, and within 5 seconds press
the Numeric Keys r for the preset number
, you may enjoy a two-channel pres-
12
harman/kardon
between 01 and 30 that you wish to assign to the
station. (See page 32 for more information.)
Delay/Prev Ch.: Press this button to begin
the process for setting the delay times used by the
AVR 335 when processing surround sound. After
pressing this button, the delay times are entered by
pressing the Set Button p and then using the
Buttons n to change the setting. Press the
/
⁄ ¤
Set Button p again to complete the process.
(See page 24 for more information.)
Speaker Select: Press this button to begin
the process of configuring the AVR 335's bass man-
agement system for use with the type of speakers
used in your system. Once the button has been
Buttons n to select the
pressed, use the
/
⁄ ¤
channel you wish to set up. Press the Set Button
p and then select another channel to configure.
When all adjustments have been completed, press
the Set Button p twice to exit the settings and
return to normal operation (see page 16).
Multiroom: Press this button to activate the
multiroom system or to begin the process of changing
the input or volume level for the second zone. When
used with the DVD player, it controls the Subtitle
On/Off function (see page 35).
Volume Up/Down: Press these buttons to raise
or lower the system volume.
TV/Video Selector: This button does not have a
direct function on the AVR 335, but when used with a
compatibly programmed VCR, DVD or satellite receiver
that has a "TV/Video" function, pressing this button will
switch between the output of the player or receiver
and the external video input to that player. Consult the
owner's manual for your specific player or receiver for
the details of how it implements this function.
6-Channel/8-Channel Direct Input: Press
this button to select the device connected to the
8-Channel Direct Inputs j as the audio source.
(See page 27 for more information.)
When you wish to use the 6-Channel/8-Channel
Direct Input j in conjunction with a video source,
you must first select the video source by pressing one
of the Input Selectors e, then press this button to
choose the device connected to the 6-Channel/8-
Channel Direct Input j as the audio source.
Mute: Press this button to momentarily silence
the AVR 335 or TV set being controlled, depending on
which device has been selected. When the AVR 335
remote is being programmed to operate another device,
this button is pressed with the Input Selector Button
e to begin the programming process. (See page
37 for more information on programming the remote.)