Advertisement
optimum performance, always keep the unit out of direct sunlight when running on
the cold cycle. When the unit is running on the warm cycle, it will warm to
approximately 120°F. On cold days, the unit will need more time to reach the
maximum warm temperature. To promote your unit's cooling capacity on warm
days, try reusable frozen ice packets. These are particularly helpful in keeping your
unit cold while unplugged. Contact Technical Support at (866) 584-5504 for further
information.
The Vector Thermo-Electric Travel Cooler & Warmer can be used with most
food and beverages, either cold or hot. Use with standard household containers or
ready-to-use food and drink packaging. Ideal as a:
Cooler:
• Beverages – sodas, beer, wine, juice, milk, iced tea or coffee, shakes, thirst
quenchers, water and more — in cans, bottles, cartons, pouches,
sport bottles, etc.
• Food –
salads, sandwiches, deli meats, hamburgers, hot dogs, meat or
fish, buns, condiments and dips, etc.
• Desserts –
puddings, fruit cups, yogurts, etc.
• Snacks –
fruit, candy, chocolate, cookies, fruit bars, chips, etc.
Warmer:
• Beverages – hot coffee and tea, cocoa, milk, etc.
• Food –
leftovers, pre-packaged/pre-heated meals, take-out foods, soups,
covered dishes, stews, casseroles, etc.
FEATURES
• Compact, lightweight, completely portable — use with vehicle's or boat's
12 volt DC accessory outlet, or appropriate 12 volt DC power supply
• Non-wearing thermoelectric system cools to approx. 40ºF below surrounding air
temperature or warms to approx. 120ºF
• Built-in holder for two cups or two cans
• Use with standard household containers or ready-to-use packaging
• Rests on vehicle seat or floor for easy access
• Padded lid
• Extra-long, 7', 12 volt DC power cord with built-in 5-amp fuse protected plug to
protect the unit and power source
• Convenient, detachable shoulder strap for easy portability
• Durable, weather resistant construction with easy-open and close lid
• Environment-friendly, CFC-free, polyurethane liner
• Cold/heat transfer to foods via temperature-efficient liner
• Built-in heat dissipation fan with long-life, brushless motor
• HOT/OFF/COLD sliding power switch
• Automatic shut-off to prevent overheating of unit
• "COLD" and "HOT" LED indicators
2
CAUTIONS
• This unit is intended for use with a 12 volt DC power source that can
provide at least 4 amps of current. DO NOT attempt to use with any
other power source.
• NEVER operate unit in an enclosed space. ALWAYS ensure that there
is adequate ventilation and free flow of air around the unit, so that
air expelled by the fan is effectively dissipated.
• When operating the unit in a vehicle or boat cabin, adequate
ventilation must be provided by an air conditioning system or open
window. In a car with windows up, air temperatures can reach 150
degrees F.
• This unit is intended for portable use only; it is not designed to be
built-in or recessed — this would interfere with the unit's air
dissipation system, and could cause a fire or other safety hazard.
• Use only with the supplied power cord. If cord becomes worn or
damaged, discontinue use and call Customer Service department at
(866) 584-5504 for authorized replacement.
• Never allow the cooler/warmer to be immersed in water or other
liquid. This will void the warranty.
USING THE TRAVEL COOLER/WARMER AS A COOLER
Connecting to a vehicle's 12 volt DC accessory outlet for extended use:
1. Make sure the unit's HOT/OFF/COLD switch is in the OFF position. Start
vehicle, or turn ignition to "accessory" position.
2. Insert the DC plug into the vehicle's 12 volt DC accessory outlet.
3. Move the HOT/OFF/COLD switch on the cooler to the COLD position.
4. The LED COLD indicator will light to show the unit is cooling.
5. Put items into the cooler and close the lid. Do not overstuff the cooler, or keep
the lid from closing.
6. Keep cooler lid closed during operation and reclose it quickly when adding
items to it or removing items from it.
7. After use, turn the switch to the OFF position and empty the cooler.
8. Disconnect the power cord from the vehicle's accessory outlet and from
the cooler.
9. Clean unit as described in the Care & Maintenance section of this manual.
10. Store in a cool, dry area out of direct sunlight.
11. Keep switch in OFF position for five minutes before switching between hot and
cold.
CAUTIONS
• The cooler takes about 100-120 minutes to reach its maximum cool
temperature (approx. 40ºF below that of surrounding air). It is
recommended that items to be placed in the cooler be pre-chilled.
This will assist the cooler in reaching the lowest temperature as
quickly as possible.
3
Hide quick links:
Advertisement
