Installing 9532 Usb Driver - Leadtek GPS 9532 Tehnical Specification

.
FOR PC

Installing 9532 USB Driver

(for USB version only)
If the model of your purchase applies USB connection, you will need to install
the USB driver. Skip this section and go directly to Installing WinFast
Navigator on the next page if the USB driver has already been installed on
your computer.
Step 1.
Insert the software CD in your CD-ROM
drive. The Autorun program will display a
setup screen as the figure to the right.
Note: You can also start the setup program
by running install.exe in the main directory
of the CD.
Step 2.
Before the system initiates the installation, it
will check your OS version and display a
dialog box as the figure to the right. Press
Install to start the installation.
Step 3.
Upon completion of the installation, the
system displays a dialog box. Click OK .
Step 4.
Now click Exit on the dialog box as the
figure to the right to return to the Autorun
setup screen.
Installing 9532 USB Driver 3 GPS 9532
- - 18