Download Print this page

NEC LED-VD1 User Manual

Video distributor.
Hide thumbs

Advertisement

User's Manual
Video Distributor
LED-VD1

Advertisement

   Related Manuals for NEC LED-VD1

   Summary of Contents for NEC LED-VD1

  • Page 1

    User's Manual Video Distributor LED-VD1...

  • Page 2: Table Of Contents

    Index Declaration of conformity .......................... English-1 Important Information ..........................English-2 Safety Precautions, Maintenance & Recommended Use ............... English-3 Contents ..............................English-4 Parts Name and Functions ........................English-5 Front Panel .............................. English-5 Rear panel ............................... English-5 Connections ............................... English-6 Connecting an External Device ....................... English-6 Connecting the Power ..........................

  • Page 3: Declaration Of Conformity

    Declaration of conformity For USA FCC Information 1. Use the attached specified cables with the LED-VD1 (D000LD) video distributor so as not to interfere with radio and television reception. (1) Please use the supplied power cord or equivalent to ensure FCC compliance.

  • Page 4: Important Information

    Voltage 120* * When operating the video distributor LED-VD1 (D000LD) with its AC 125-240V power supply, use a power supply cord that matches the power supply voltage of the AC power outlet being used. NOTE: This product can only be serviced in the country where it was purchased.

  • Page 5: Safety Precautions, Maintenance & Recommended Use

    Safety Precautions, Maintenance & Recommended Use FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING Immediately unplug your video distributor from the wall outlet and refer WHEN SETTING UP AND USING servicing to qualified service personnel under the following conditions: THE VIDEO DISTRIBUTOR: •...

  • Page 6: Contents

    Contents The parts supplied with this unit are as follows. In the rare case that one of these parts is missing or damaged, contact the retailer. • Power cord (1.8 m US) • Power cord (1.8 m EU) • Signal cable (DVI-D, 1.8 m) •...

  • Page 7: English

    Parts Name and Functions Front Panel POWER LED DISPLAY OUTPUT RS- 4 8 5 LED-VD1 V ID EO D ISTRIBUTOR POWER LED DISPLAY OUTPUT RS- 485 Power lamp DVI Input lamp Lights up (red) when the power is ON. Lights up (orange) with an image signal is input to the DVI input terminal.

  • Page 8: Connections

    Connections Connecting an External Device • To protect the device, switch off the power before connecting it. • When connecting devices, follow the instructions in their user manuals. Connecting the Power NOTE : • Connect the power cord to the unit before connecting it to the power outlet. 1.

  • Page 9: Connection Methods

    Connection Methods Before Connecting • Before connecting to the device, turn off the power to the device you are connecting to and all peripheral devices. • Refer to the user's manuals for those devices. Video processor [LED-VP1] LED module Computer (USB/RS485 adapter) LED module [LED-06AF1/LED-15BF1]...

  • Page 10: Installing Drivers

    Installing Drivers 1. Compatible Operating Systems Windows 2000 Professional Windows XP Professional Windows 2003 Server Windows Vista Windows 7 2. How to Install Connect the USB/RS-485 adapter to your PC after the drivers have successfully been installed. Insert the included CD-ROM into your computer's optical media drive. Run “RS485_SETUP.exe”...

  • Page 11

    (6) Click [Install]. (7) The Success window will be displayed. [OK] Click to complete the driver installation. English-9...

  • Page 12: Troubleshooting

    Troubleshooting Check the following items. Problems/Symptoms Cause and Solution Cannot perform LED module mapping The LED module connector cable for this product must be connected using a DVI dual-link cable. Cannot perform command communication • The USB/RS-485 adapter will be detected as a COM port by the PC. Check the COM port number of the connected adapter.

  • Page 13: Appendix

    Product Name LED-VD1 Notes Interface DVI-D Image Input Compatible 1024x768 @60Hz Resolutions (*1) DVI-D For cascade connection of LED-VD1 Image Output Interface Connect to the LED module using a dual-link (*2) DVI-D (8 outputs) cable (*3) Interface RJ-45 (input/output 1 system)

  • Page 14: Dimensional Drawing

    Dimensional Drawing 479.2 325.1 Unit: mm English-12...

  • Page 15: Manufacturer's Recycling And Energy Information

    Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.

Comments to this Manuals

Symbols: 0
Latest comments: