Getting Started Remove the speaker from the box and remove any packaging material from the product. In the Box • Speaker unit • Stand and screws to attach the unit • Remote control • Instruction manual • AC adapter • Power cable Safety Instructions When using electrical devices, basic safety precautions should always be followed.
Page 4
This device is intended for household use only and should not be used for industrial or commercial purposes. Do not operate this device with a damaged plug or cord, after a malfunction or after being dropped or damaged in any way. Do not use this device for anything other than its intended use.
Port Diagrams Top Panel 1. iPhone / iPod Dock 2. Standby 3. Function 4. Previous Track 5. Next Track 6. Volume - 7. Play/Pause 8. Volume + STANDBY FUNCTION Back Panel 1. Video Out 2. Left/Right Line In 3. 3.5mm Audio In 4.
Remote Control POWER 1. Power 2. Sleep SLEEP MUTE 3. Mute 4. iPod Menu iPod SOURCE MENU MENU 5. Menu Up PREVIOUS NEXT 6. Source ENTER 7. Previous Track 8. Enter MENU 9. Next Track 10. Memory and Time Set 11.
Page 7
Setting up Your Tower Speaker Attaching the Base 1. Carefully take the tower body and base out of the packaging. 2. Locate and set aside the screws and washers. 3. Attach the base to the body aligning the three holes in the base with three holes on the tower.
3. The minute digits on the display will now blink. Repeat the above process until correct minute is set. Press the MEM/TIME to confirm the minute setting. 4. You can also connect your iPhone or iPod to the device and power it on, the display will automatically sync the time with the iPhone or iPod.
Sleep Mode Press the SLEEP button, the display will then blink intermittently. Continue to press the button until the display shows the time you would like to set. It is possible to set from 10 to 90 minutes. The display will blinks three times to confirm the sleep setting, and then return to the interface.
Line-In Jack Requires a 3.5mm cable (not included). 1. Connect the 3.5mm cable to the Aux in jack. Connect L in the other end of the 3.5mm cable to any available audio source. 2. Press the power button to turn the device on. 3.
Page 11
Care and Maintenance • It is recommended to unplug the device when not in use. • Do not play music at excessive volume levels as damage to hearing and/or the equipment may occur. • Do not use this unit in wet or damp conditions. •...
Need help?
Do you have a question about the P16-41487 and is the answer not in the manual?
Questions and answers