Download Print this page

Samson POWERBRITE PB9 Specifications page 2

Power distribution and rack light
Hide thumbs Also See for POWERBRITE PB9:

Advertisement

ARCHITECT'S & ENGINEER'S
SPECIFICATION
The unit shall provide power distribution
to eight switched rear receptacles arranged
horizontally and vertically to accommodate
standard AC plugs and AC adapters as well as
one unswitched front panel receptacle.
The unit shall provide a front panel
retractable fluorescent light (using a F4T5CW
type bulb and a condenser type FS2 fluores-
cent starter), a 15 amp circuit breaker, a mains
On/Off switch and a light switch. It shall pro-
vide spike protection from hot to neutral, hot
to ground and neutral to ground. The
PowerBrite PB9 shall have a maximum clamp-
ing voltage (@ 100 amps) of 400 volts,
Maximum surge current of 8,000 Amps and a
maximum spike energy of 85 joules all at a
response time of 1 nanosecond. The unit shall
have an internal 500 milliAmp T-type starter
fuse.
The front panel nameplate shall be cus-
tomizable where as the Samson Logo may be
replaced with any company logo. The
PowerBrite owner's manual shall provide infor-
mation on obtaining a custom logo.
The dimensions shall be 19 (482 mm)
wide, 7.5 (190 mm) deep and 1.75 (44.5
mm) high (1 rack space). Weight shall be 7 lb.
(3.2 kg). The PowerBrite shall carry a three-
year warranty.
The unit shall be a SAMSON POWERBRITE
PB9.
AC MAINS
BREAKER
BLOCK DIAGRAM
CIRCUIT
FRONT
AC OUTLET
LIGHTING
SWITCH
POWERBRITE PB9 SPECIFICATIONS
Electrical:
Number of Outlets
Max. Current
Input Voltage (RMS)
Spike Protection Mode
Max. Clamping Voltage (@ 100 A)
Response Time
Max. Surge Current
Max. Spike Energy
Noise Attenuation
Power Cord
Bulb/Starter:
Fluorescent Bulb Type
Bulb Life (Typical)
Lumens
Fluorescent Starter
Starter Fuse (Internal)
General:
Dimensions
482 mm (w) x 190 mm (d) x 44.5 mm (h)
Weight
Conforms
OUTLET
SWITCH
BALLAST
Specifications subject to change without notice. © 1998 SAMSON
8 switched, 1 unswitched
15 Amp (circuit breaker protected)
0 to 130 VAC continuous
Hot to Neutral,
Hot to Ground,
and Neutral to Ground
400 VAC
1 nanosecond
8,000 Amps (8 x 20 ms pulse)
85 Joules
>20 dB, 1.5 MHz to 200 MHz
F4T5CW
3,000 Hours
Condenser Type FS2
(110 Vac, 4 - 20 Watts)
500 milliAmp T-type
19 (w) x 7.5 (d) x 1.75 (h)
7 lbs. / 3. 2 kg
UL and CUL
SURGE
REAR
PROTECTION
OUTLETS
15A
AND RFI
s
FLUORESCENT
LIGHTING UNIT
Pendant
95

Advertisement

loading