Table of Contents
Advertisement
Quick Installation for Windows
VCOMM (PPP) -- Basic Internet
Precautions:
1.
This quick installation guide aims at helping you to
setup the ISDN TA PCI Card and go to the Inter-
net in VCOMM mode with ease and efficiency. For
NDIS and CAPI modes, refer to the user manual
for details.
2.
Before you proceed the following steps, make sure
no old driver suites exist in your computer. Unin-
stall any old driver suites that already exist, for
these could hamper your computer system.
Getting Started
Before you begin, make sure you turn off all power to your
computer.
1.
Remove the chassis cover of your computer.
2.
Align the contact edge of the ISDN TA PCI Card to-
ward the connector of any free PCI Bus Master expan-
sion slot. Push firmly and slowly until it is fully seated
in the connector.
3.
Screw the PCI card to the computer chassis with the
provided screws.
4.
Replace the computer's chassis cover.
5.
Turn on your computer.
6.
Start
98/ME/2000/XP will automatically detect the new
device.
7.
Load the device driver disc into the CD-ROM drive of
your system, make sure the file path is correct and per-
form
continue.
8.
When the following dialog box appears, select the ap-
propriate switch type in Windows 2000/XP and click
Next.
setting.
98/ME/2000/XP
Windows
the
Follow the on-screen instructions to finish
98/ME/2000/XP.
following
- 3 -
Windows
steps
to
Advertisement
Table of Contents
