Epson EB-1880 User Manual page 78

List of Functions
Submenu
(Only available when an analog RGB computer signal is being
Auto Setup
input.)
Set to On to automatically adjust Tracking, Sync., and Position to
the optimum state when the input signal changes.
Resolution (Only available when an analog RGB computer signal is being
input.)
Set to Auto to automatically identify the resolution of the input
signal. If images are not projected correctly when set to Auto, for
example if some of the image is missing, adjust to Wide for wide
screens, or set to Normal for 4:3 or 5:4 screens depending on the
connected computer.
Tracking (Only available when an analog RGB computer signal is being
input.)
You can adjust computer images when vertical stripes appear in
the images.
Sync. (Only available when an analog RGB computer signal is being
input.)
You can adjust computer images when flickering, fuzziness, or
interference appear in the images.
Function
Submenu
Position (This item cannot be set when the source is HDMI.)
You can adjust the display position up, down, left, and right when
a part of the image is missing so that the whole image is projected.
(This setting can only be adjusted when a composite video or s-
Progressive
video signal is being input. When a component video or RGB
video is being input, this setting can only be adjusted if the signal
being input is an interlaced signal (480i/576i/1080i).)
g
Interlace (i) signal is converted to Progressive
conversion)
Off: Ideal for images with a large amount of movement.
Video: Ideal for general video images.
Film/Auto: This is ideal for movie films, computer graphics, and
animation.
(This cannot be set when a digital RGB signal is input, or when an
Noise Reduction
interlace signal is being displayed when Progressive is set to
Off.)
Smoothes out rough images. There are two modes. Select your
favorite setting. It is recommended that this is set to Off when
viewing image sources in which noise is very low, such as for
DVDs.
When the projector's HDMI port is connected to a DVD player,
HDMI Video
Range (EB-1880/ the projector's video range is set according to the DVD player's
EB-1870/ video range setting.
EB-1850W only)
You can select input signal from Computer port.
Input Signal
If set to Auto, the input signal is set automatically according to
the connected equipment.
If colors do not appear correctly when set to Auto, select the
appropriate signal according to the connected equipment.
78
Function
g
(p). (IP