Advertisement
Note:
1) Do not insert batteries into the presenter in the wrong direction.
2) Do not leave bad or exhausted batteries in the presenter.
3) If you do not use the presenter for a long period of time, remove
the
batteries to avoid possible damage from battery corrosion.
4) If the presenter does not function correctly or if the operating range
becomes reduced, try to replace the batteries with new ones.
5. Setup
Plug the USB receiver into the USB port on your computer. The
system will automatically search for the new hardware and complete
the installation.
6. Timer setting
1) Press Timer on the side of the device, [000] appears and starts
flashing. Press Timer repeatedly to select the length of your
presentation.
Note:
The time increases by 5 minutes from 0 to 60 minutes and by 10
minutes from 60 to 590 minutes.
2) Stop pressing Timer when it reaches the time desired. The digits
will stop flashing to confirm your choice.
3) When there are 5 minutes remaining, it will remind the user by
vibrating every time the time decreases by one minute.
4) If you wish to cancel the timer setting, press and hold Timer until
the LCD displays [000].
Note:
[000] on the LCD screen corresponds to 0 minute. For example,
the timer is set to 120 minutes when it shows [120] on the screen.
- 3 -
7. Technical parameters
Presenter
Frequency range
Operating voltage
Laser Output power
Laser wavelength
Power supply
Operating System
Working Voltage
USB Version
Size
Weight
Warning:
Laser radiation
Class
2
laser product
Do not view directly with optical instruments
Do not point at people and animals
Please keep out of reach of children
Note:
Please note this instruction is only intended for reference.
August International Ltd reserves rights to revise the product
specifications, features and design without notice.
10 meters
2400 ~ 2483MHz
1.8 – 3.3V
<1mW
640nm
2 x AAA batteries
120x40x20mm
56g (inc. batteries)
Windows 98
/M
E/2000/XP/
Vista/7/8, Mac OS, Linux
4.5
–
5.5V
USB1.1 compatible with 2.0, 3.0
56x18x9mm
6g
- 4 -
Advertisement
