Page 2
Artistic Licence Engineering Ltd. Rack-Split RDM User Guide...
Page 3
Rack-Split RDM Rack-Split RDM is a fully bi-directional DMX512 splitter or Distribution Amplifier. All data connections are mounted on the front panel of a 1RU 19 inch case. The product provides all the electronics needed to support the ESTA RDM – Remote Device Management Protocol. It supports both the Draft and Standard version V1.0.
Page 4
(returning unwanted data continuously). Return data from this output will be disconnected. DMX512 The DMX512 input is connected to the male 5 pin XLR on the Input left of the front panel. The female 5 pin XLR provides a passive loop through such that multiple DMX512 receivers can be connected to the same signal.
Page 5
DMX512 compatible! The Safe output can be used as an extra output, although it will not respond to RDM data. DMX512 Rack-Split RDM is compatible with all versions of DMX512 including: 1. DMX512 2. DMX512 (1990) 3. DMX512A 4.
Page 6
Please note that we use the term Earth-Ground to avoid international confusion. In Europe Earth-Ground is called Earth, in the USA Earth-Ground is called Ground. Circuit Description Chassis Bonded to Earth-Ground. DMX512 Input Type: Isolated. (including Loop Pin 1: Connects to internal isolated Through) circuit.
Page 7
Artistic Licence Engineering Ltd. Rack-Split RDM User Guide...
Need help?
Do you have a question about the DMX512 and is the answer not in the manual?
Questions and answers