Knowing Your Tablet - Venus Tablet Quick Start Manual

Venus Tablet Quick Setup Guide
Left hand USB
1. Place the tablet on your desk in the direction you like to use it.
Select the USB port like explained in above picture by using the
2.
USB Socket Slider.
3. Connect the Venus Tablet to your PC or MAC with the supplied
USB cable. It's recommend not to connect to Hubs or front USB
ports of your PC tower.
4. After connection the big white Mode- LED will pop up and the
small white left/right hand indicator LED.

Knowing your Tablet

1. Working Area: The working area is the active area where the pen
response. The usage is different to mouse usage. The working area
is equal with your monitor, you can dirtly point on the place you like
to move the mouse to. If you move the pen to left bottom corner, the
pointer on your display directly goes to this point. This makes work
much more efficient and much quicker than using a mouse.
Hot Keys
Navigation wheel
with mode button
Hot Keys
USB Socket Slider Right hand USB port
16:9 working area
Page 5