Table of Contents
Advertisement
E5RJ2ED_EN.book Page 35 Thursday, October 29, 2009 3:30 PM
Parental
A "Custom"
A "Parental"
[SETUP]
Some BD-videos or DVD-videos feature a parental lock
level.
Playback will stop if the ratings exceed the levels you set, it
will require you to enter a password before the disc will
play back. This feature prevents your children from
viewing inappropriate material.
1. With "
" selected press [ENTER].
Password input field appears.
2. If a password has not been set, follow A).
If a password has already been set, follow B).
If you want to change the password, follow B) and
C).
If you forget the password, follow D).
A) Enter 4 digit password using [Number buttons].
• "4737" cannot be used.
B) Enter 4 digit password
C) Select "Password Change", then press [ENTER].
Enter the new password.
D) Enter "4737". Current password and "Parental"
settings are now cleared. Enter a new password.
3. Select the desired item to set the rating level for,
then press [ENTER].
4. Select the desired rating level, then press [ENTER].
<BD rating level>
All
Sets no limit.
Age Setting Allows you to enter the age to limit, and
prohibits the playback of a disc whose
rating level exceeds the age setting
entered here.
• Enter the age as a 3-digit-number.
(e.g., For age 15, enter [0], [1], [5].)
<DVD rating level>
All
Parental control is inactive; all discs can be
played back.
8
DVD software of any grades (adult /
general / children) can be played back.
7
[NC-17] No one under 17 admitted.
6
[R] Restricted; under 17 requires
accompanying parent or adult guardian.
5
[PGR] Parental Guidance Recommended.
4
[PG13] Unsuitable for children under 13.
3
[PG] Parental Guidance suggested.
2
[G] General audience.
1
Suitable for children.
To Cancel Parental Lock Temporarily
Some discs allow you to cancel the parental lock
temporarily. With those discs, the message below will
appear when you try to play them back.
"Enter current password."
Follow the instruction which appears on the TV screen to
cancel the parental lock.
EN
FUNCTION SETUP
HDMI CEC (REGZA - LINK)
[SETUP]
You can control all HDMI CEC compatible components
connected via an HDMI cable by simple button operations
of the remote control of this unit. In order to enable the
function, you need to set "HDMI CEC" to "On".
One Touch Play
When the operations with following buttons of the remote
control of this unit are performed, the TV will automatically
be turned on and switched to the appropriate input
channel.
Buttons for one touch play:
- [PLAY B]
- [TOP MENU], or [POP MENU / MENU] (when a disc is
inserted in the unit)
Standby
When you press and hold [ON/STANDBY Q] for 2 seconds,
it turns off the power of the TV first and then turns off the
power of this unit.
When the connected HDMI CEC compatible display device
is turned off, this unit may also turn off together.
System Information
Get & Set Menu Language
The unit recognises the OSD language set for the TV and
automatically sets the same language as the player menu
language (OSD menu language) for this unit.
• This feature is available only when "Auto (XXX)" is
selected in "Player Menu" in the setup menu. (Refer to
page 27.)
Receiving Operational Signal from TV's Remote
Control
You can operate this unit with TV's remote control. Check
your TV owner's manual for details.
• This function may not work properly depending on the
connected TV.
• The available operation may differ depending on the TV's
remote control you use.
• Other components must be compatible with HDMI CEC
in order to use this function.
A "Custom"
A "Others"
A "HDMI CEC"
35
Advertisement
Table of Contents
