Pole Mounting; Block Wall Mounting - Electro-Voice Sx600 User Manual

Pole Mounting

Follow the pole manufacturer's recommendations when mounting to a
pole. On wooden poles, make sure there is no rot or other deterioration.
Through-bolts with backing plates are highly recommended. Lag bolts
should only be used in conjunction with straps.
1/2" Bolts
Approved Straps
(6 Req'd)
(4 Req'd)
SuperSAM
TM
Bracket
Figure 2: Pole Mounting

Block Wall Mounting

Do not attempt to mount an Sx600 to a block or brick wall without through-
bolts and large, heavy steel backing plates on both sides of the wall. On
poured concrete walls use deep ½ inch diameter anchors that cannot be
pulled out once set. Use all 6 mounting holes.
SuperSAM
TM
Bracket
1/2" Bolts
(6 Req'd)
Block Wall Heavy Steel Backing Plates Block Wall
Figure 3: Block Wall Mounting
Electro-Voice User Manual 5