MOBILITY
Oil change
Only MINI dealers are to perform oil changes.
Coolant
Coolant consists of half water and half additive.
Not all commercially available additives are suit-
able for your MINI. Your MINI dealer knows
which additives are suitable and will be glad to
advise you.
Only use suitable additives; otherwise,
engine damage may result. Because addi-
tives are harmful to your health, it is important
to follow the instructions on the
Comply with the appropriate environmen-
tal protection regulations when disposing
of coolant
additives.<
Coolant temperature
If the coolant, and therefore the engine, should
overheat, then a warning lamp will go on.
A message appears on the Control Display.
Checking coolant level
Do not add coolant to the cooling system
when the engine is hot. Escaping coolant
can cause
burns.<
Do not open the hood until the engine has
cooled down.
The coolant level is correct if it is between the
marks.
210
Engine compartment
containers.<
Online Edition for Part no. 01402917320 - © 10/12 BMW AG
Topping off
1.
Turn the cap of the expansion tank a little
counterclockwise to allow any accumulated
pressure to escape, then continue turning to
open.
2.
Slowly fill to the correct fluid level; do not
overfill.
3.
Close by turning the cap.
Have the reason for the coolant loss eliminated
as soon as possible.
Need help?
Do you have a question about the MINI and is the answer not in the manual?
Questions and answers