Related Manuals for Rivera FS8M
Summary of Contents for Rivera FS8M
-
Page 1: Owners Manual
External MIDI Interface OWNERS MANUAL Version 1.0 April, 2002 FS8M External MIDI Interface 1.0 p 1... - Page 2 INTRODUCTION The FS8M External MIDI interface replaces the FS8 footswitch and allows MIDI control of the amplifier. You cannot use the footswitch and the interface at the same time. CONNECTORS ON THE PANEL 6-15 MIDI MIDI MIDI NEG. THRU CHANNEL 6-15 VDC PIN NEG.
- Page 3 If it ever becomes necessary to replace it, you can order one from Rivera or make it yourself. It does not require shielded cable, and the pins are wired straight through. (1-1, 2-2 etc.) MIDI IN Standard MIDI input. Use this to connect any standard MIDI controller.
- Page 4 We had no control over the labeling. The unfortunate result of this mismatch is that you have to set the MIDI Channel Selector Switch to 0 to select MIDI Channel 1. FS8M External MIDI Interface 1.0 p 4...
-
Page 5: Midi Control
FS8 provides. The interface responds to MIDI Program Change Commands only. It can be controlled by the Rivera Head Master foot-operated MIDI controller or by any standard MIDI controller. Combinations And Separate Functions Two types of commands are provided - Combinations and Separate Functions. - Page 6 BONEHEAD MIDI PROGRAM CHANGES COMBINATIONS CHANNEL BOOST1 BOOST2 BOOST3 UNUSED FS8M External MIDI Interface 1.0 p 6...
- Page 7 BONEHEAD MIDI PROGRAM CHANGES COMBINATIONS CHANNEL BOOST1 BOOST2 BOOST3 UNUSED FS8M External MIDI Interface 1.0 p 7...
- Page 8 BONEHEAD MIDI PROGRAM CHANGES COMBINATIONS CHANNEL BOOST1 BOOST2 BOOST3 UNUSED SEPARATE FUNCTIONS CH 1 CH 2 CH 3 TOGGLE BOOST 1 TOGGLE BOOST 2 TOGGLE BOOST 3 UNUSED TOGGLE FX TOGGLE ACTIVE BOOST FS8M External MIDI Interface 1.0 p 8...
Need help?
Do you have a question about the FS8M and is the answer not in the manual?
Questions and answers