Customizing The Dvd Function Settings; Language Setup; System Setup; Video Setup - RCA DRC69707E User Manual

Customizing the DVD Function Settings

Language Setup

1. Press the SETUP button on the remote
control or MENU button on the unit in
stop mode (when disc is not playing).
2. Press the button to select Language
Menu.
3. Use the or
EN
(Player Menu, Audio, Subtitle or Disc
Menu), then press the
4. Use the or
preferred language, then press the ENTER
button to confirm.
5. Press the button to go back to the
previous menu. Repeat steps 3 and 4 to
adjust other options.
6. To exit the SETUP MENU and return to the
normal screen, press the RETURN or SETUP
button.
Language Menu
Player Menu
Language Menu
Note:
• Some DVDs may not play in the audio
language selected. A prior language may
be programmed on the disc.
• Some DVDs may be set to display subtitles
in a language other than the one
selected. A prior subtitle language may be
programmed on the disc.
• Some DVDs allow you to change subtitle
selections via the disc menu only. If this
is the case, press the MENU button and
choose the appropriate subtitle from the
selection on the disc menu.
• Some DVDs may not included your pre-
selected language. In this case, the DVD
player automatically displays disc menus
consistent with the disc's initial language
setting.

Video Setup

1. Press the SETUP button on the remote
control or MENU button on the unit in
stop mode (when disc is not playing).
16
DRC69707E RCA 3L MTK.indd 16
button to select the option
button.
button to select your
2. Press the or button to select Video
Menu.
3. Use the or button to select the option
(Brightness or Contrast), then press the
button.
4. Use the or button to make adjust
the setting, then press ENTER button to
confirm.
5. Repeat steps 3 and 4 to adjust other
options. Press the
the previous menu.
6. To exit the SETUP MENU and return to the
normal screen, press the RETURN or SETUP
button.
Video Menu
Video Menu

System Setup

1. Press the SETUP button on the remote
control or MENU button on the unit in
stop mode (when disc is not playing).
2. Press the or button to select System
Menu.
3. Use the or button to select the option
(Tv Display or Default), then press the
button.
4. Use the or button to adjust the
settings, then press ENTER button to
confirm.
5. Repeat steps 3 and 4 above to adjust other
options. Press the
the previous menu.
6. To exit the SETUP MENU and return to the
normal screen, press the RETURN or SETUP
button.
System Menu
System Menu
button to return to
button to return to
8/9/2011 14:34:35