Page 1
MANNHART OPERATING / TECHNICAL MANUAL Vegetable Cutters Model M2000 - 115V-1/2 HP Model M3000 - 115V-3/4 HP Made in U.S.A. COMPLETE RANGE OF SLICERS, DICING GRIDS AND SHREDDERS AVAILABLE. EACH ACCESSORY SUPPLIED WITH STORAGE SYSTEM. MANNHART, INC. 651 Industrial Boulevard...
Page 2
SLICERS & SHREDDERS PAGE 27 DICING ACCESSORIES SPECIAL SLICERS FOR JULIENNE CUTS PAGE 28 REPLACEMENT CUTTING EDGES & SHREDDER PLATES PAGE 29 REPLACEMENT CUTTING EDGES & JULIENNE BARS PAGE 30 EJECTORS STORAGE RACK PAGE 31-32 ACCESSORIES AND PARTS LIST FOR M2000/M3000...
Page 3
Vegetable Cutters MANNHART Mannhart M2000 / M3000 ● COMPACT AND STURDY DESIGN ALL CAST ALUMINUM AND STAINLESS STEEL ● ATTACHMENTS ARE FULLY INTERCHANGEABLE WITHOUT TOOLS ● HIGH OUTPUT, SAVES TIME AND LABOR COST ● SIMPLE TO OPERATE AND EASY TO CLEAN ●...
Page 4
Vegetable Cutters MANNHART Mannhart M2000 / M3000 TYPE DESIGNATION SOME APPLICATIONS SIZE OF CUT Coleslaw SLICER S2 Radishes Onions 2 mm (1/16") Cucumbers Carrots, Celery Cucumbers SLICER S3 Zucchini, Mushrooms 3 mm (1/8") Lettuce for Tacos Scalloped Potatoes Cucumbers, Carrots...
Vegetable Cutters MANNHART Mannhart M2000 / M3000 OPERATING INSTRUCTIONS ● SAFETY NOTES ● VIDEO TRAINING TAPE OR CD-ROM ● INSTALLING OF SLICERS & SHREDDERS ● INSTALLING OF DICING GRIDS WITH CORRESPONDING SLICERS ● CLEANING ● PREVENTATIVE MAINTENANCE OF MACHINE AND ACCESSORIES ●...
Page 7
Injury to the operator and damage to the machine can result from incorrect use of this vegetable cutter. Read these instructions carefully and be sure that all users of the Mannhart Begetable Cutter are trained before being allowed to use the vegetable cutter.
Page 8
Vegetable Cutters MANNHART Mannhart M2000 / M3000 INSTALLING & REMOVING FEED HOPPER LID REVIEW THE MANNHART VIDEO TRAINING TAPE PRIOR TO USING YOUR NEW MANNHART VEGETABLE CUTTER. READ THE OPERATING INSTRUCTIONS CAREFULLY. WARNING: Always ensure that the ON/OFF switch (C) is in the OFF POSITION prior to installing or removing accessories.
Page 9
MANNHART Vegetable Cutter. Clean your MANNHART Vegetable Cutter - SEE CLEANING - and close feed hopper lid. Unplug the power supply cord while the MANNHART Vegetable Cutter is not in use.
Page 10
We recommend the use of a carrot to push the remaining vegetables through the grid - SEE VIDEO TAPE DEMONSTRATION. Place DICING GRID into the storage rack and CLEAN your MANNHART Vegetable Cutter - SEE CLEANING - and close feed hopper lid. Unplug the power supply cord while storing the...
REMOVE FEED HOPPER LID and rinse thoroughly under running water. NEVER USE DISHWASHER. Feed hopper lid may be soaked in sanitizing lotion if desired. HAND WIPING or RINSING of the cutting compartment of the Mannhart Vebetable Cutter is recommended. Do not use pressure washer inside the cutting compartment.
Vegetable Cutters MANNHART Mannhart M2000 / M3000 TROUBLE SHOOTING GUIDE MACHINE DOES NOT START — Check power supply cord and outlet. — Check whether feed hopper is properly installed and locked in place. — Check whether magnet in toggle lock is intact. (Part #2110)
Page 14
Vegetable Cutters MANNHART Mannhart M2000 / M3000 WORK STATION - MACHINE DIMENSIONS (Cruise Ship and Navy Vessel Mounting) TABLE TOP (Freestanding) MODEL MOTOR DIMENSIONS WEIGHT MANNHART 1/2 HP A 20.375" (520mm) 41 lbs. 2000 115/60/1 B 18.25" (465mm) (17.5 kg) C 8.5"...
Page 20
Vegetable Cutters MANNHART Mannhart M2000 / M3000 ELECTRICAL WIRING DIAGRAM MODEL M2000 and M3000...
Page 21
Vegetable Cutters MANNHART Mannhart M2000 / M3000 ELECTRICAL WIRING DIAGRAM MODEL M2000 and M3000...
Page 22
Vegetable Cutters MANNHART Mannhart M2000 / M3000 QUANTITY PART# DESCRIPTION PER MACHINE 2100 FEED HOPPER LID (STANDARD) WITH MOUNTING PINS BUT WITHOUT TOGGLE LOCK AND FIXED PUSHER ASSEMBLY 2100-A FEED HOPPER LID COMPLETE WITH MOUNTING PINS, TOGGLE LOCK AND FIXED PUSHER...
Page 23
MOTOR EXPORT 230/60/1 - 3/4 HP M3000 3306 MOTOR EXPORT 230/50/1 - 3/4 HP M3000 2310 ON/OFF TOGGLE SWITCH 2311 POWER SUPPLY CORD WITH MOLDED PLUG FOR M2000 3311 POWER SUPPLY CORD WITH MOLDED PLUG FOR M3000 2311-E POWER SUPPLY CORD FOR M2000 - EXPORT...
Page 24
POWER SUPPLY CORD FOR M3000 - EXPORT 2312 CABLE RELIEF BUSHING 2313 SUPPORT LEG REAR WITH NUT/LOCKNUT FOR M2000 2313-A SUPPORT LEG FRONT WITH NUT/LOCKNUT FOR M2000 2 3314 SUPPORT LEG REAR WITH NUT/LOCKNUT FOR M3000 3314-A SUPPORT LEG FRONT WITH NUT/LOCKNUT FOR M3000 2 2316...
Page 25
FASTENING BOLT WITH WASHERS FOR MOTOR FLANGE TO M2000 BODY 2334 SPLIT LOCKWASHER FOR MOTOR FLANGE BOLTS M2000 2335 WASHER FOR MOTOR FLANGE BOLTS FOR M2000 3332 MOTOR MOUNTING FLANGE FOR M3000 3332-E MOTOR MOUNTING FLANGE FOR M3000 EXPORT 3333...
Page 28
Vegetable Cutters MANNHART Mannhart M2000 / M3000 TYPE DESIGNATION SOME APPLICATIONS SIZE OF CUT SLICER S2 Part # 2401 2 mm (1/16") SLICER S3 Part # 2402 3 mm (1/8") SLICER S5 Part # 2403 5 mm (3/16") SLICER S5C...
Page 33
Vegetable Cutters MANNHART Mannhart M2000 / M3000 ACCESSORIES AND PARTS LIST FOR M2000 / M3000 Slicers, Julienne Slicers, Shredders & Dicing Grids Part # Description 2400 SLICER S1 2401 SLICER S2 2402 SLICER S3 2403 SLICER S5 2403-CC SLICER S5C (Crinkle Cut)
Page 34
Vegetable Cutters MANNHART Mannhart M2000 / M3000 ACCESSORIES AND PARTS LIST FOR M2000 / M3000 Shredder Frames and Plates only (unassembled) Part # Description 2422 SHREDDER FRAME FOR SH2, SH3 2423 SHREDDER FRAME FOR SH4, SH7, SHP 2475 SHREDDER PLATE ONLY FOR SH2...