HTC Blackstone Service Manual page 16

Doc. Title
To perform a soft reset
1. Remove the back cover.
2. Pull out the stylus.
3. Use the stylus to press the RESET button located between the SIM card and the storage card slots.
Your device restarts and displays the Today screen.
To perform a hard reset
Warning! Your device will be set back to factory default settings. Make sure that any additional installed
programs and/or user data have been backed up before you perform a hard reset.
1. Pull out the stylus
2. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly
press the POWER button.
3. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the
screen:
4. Release the VOLUME UP and VOLUME DOWN buttons.
5. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
To clear storage
You can also use Clear Storage to reset your device back to factory default settings.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
On the System tab, tap Clear Storage.
2.
3. Enter "1234" and then tap Yes.
HTC CONFIDENTIAL
HTC Corporation
.
Blackstone Service Manual
Doc. No. DOC-00045694
Issued Date 2008/8/21
Revised Date 2008/11/6
Page 16 of 96
SM-TP001-0704
REV.
A01