Using Your Quantum Toaster - Sunbeam TA3220 Quantum 2 Instruction Booklet

Using your Quantum toaster

Plug the toaster into a 230-240 volt AC
power outlet and switch the power on.
Toasting Bread
1. Position the bread into the bread slot.
2. Select the desired colour setting using the
Electronic Browning Control.
Important: Do not toast stale bread, rice
crackers or similar on a high setting as they
may catch fire.
3. Push the Toasting Lever down to
commence the toasting cycle.
4 4
4. When the desired browning is achieved,
the toaster will automatically turn off and
pop the toast up. If you need to remove the
toast before the cycle is complete, then
press the Cancel button. The Cancel button
will immediately interrupt the toasting
cycle and pop the toast up.
5. To remove small pieces of toast or bagels,
use the High-lift Lever to lift the toast
above the starting position. This will
prevent burning your fingers as you remove
the toast.