Hitachi VT-M294A Owner's Manual page 28

Getting Started (Initial Setup)
channel indication on the cable box changes automatically.
4. The screen shown in step 3 above changes to a TV picture and the time appears in
the VCR's display.
It may take about five minutes for auto clock setting.
If the clock is not set after about five minutes have elapsed, press GUIDE then set the
clock manually (See page 25).
If the displayed time drifts from the current time by more than one hour, select your
correct time zone and set the DST (See page 24).
What to do if the displayed time drifts from the current time by more than one hour
1. Press GUIDE, then press 6 to bring up the CLOCK SET screen. Check that item 1 is
specified "CLOCK SET: AUTO". Press 3 to bring up the TIME ZONE SETTING screen.
2. Press one of button 1-7 to select your local time zone.
3. Press GUIDE to bring up the CLOCK SET screen.
Press 4 to bring up the DST SETTING screen.
4. Choose one of the following options:
Press 1 to specify DST SETTING ON. The time advanced from the Standard Time by
one hour is displayed from the first Sunday of April through the last Sunday of October.
Press 2 to specify DST SETTING OFF. The Standard Time is displayed throughout the
year.
Press 3 to specify DST SETTING AUTO. The DST is set automatically.
5. Press GUIDE, then press 2 to set the time again.
If the displayed time drifts from the current time even after steps 1-5 have been
performed, reset the DST.
Press GUIDE and 6, then press 4 to bring up the DST SETTING screen. Specify
28