Cellink Technology BTST-9000-D User Manual page 7

1. Pairing
Press and hold the pairing/track wheel button on the stereo headset for 6 seconds to set the stereo
headset into pairing mode. The blue and red LEDs will be flashing when the stereo headset is in pairing
mode. To properly perform pairing procedure on your mobile phone, please refer to the manual of your
mobile phone for its own pairing instruction. This device name is set to be "Bluetooth Stereo Headset". If
you are asked to enter pin-code during pairing, please enter 1234. (Note: The "1234" is default pin-code
pre-stored in this Stereo headset.)
2. To make a call
- Dial out the number from your mobile phone.
- Voice is automatically transferred to the headset.
3. To receive a Call:
1. When there is an incoming call, press the answer button to answer the call and the audio channel will
be switched to the mobile phone.
2. Press the Volume control button to adjust the volume.
3. When finish talking, press the answer button to end the call and the audio channel will be switched
back to the audio device.
4. To reject a Call
- Press the reject button on the mobile phone to reject a call.
- PAGE 7 -