Back View
Back view
Label Description
1
VESA mounting holes (100
mm x 100 mm - behind
attached VESA Cover)
2
Regulatory label
3
Stand release button
4
Security lock slot
5
Barcode serial number
label
6
Dell Soundbar mounting
slots
7
Cable management slot
10
About Your Monitor
Back view with monitor stand
Use
Wall mount monitor using VESA-
compatible wall mount kit (100 mm x
100 mm).
Lists the regulatory approvals.
Release stand from monitor.
Use a security lock to secure the moni
tor. (security lock not included).
Refer to this label if you need to contact
Dell for technical support.
Attaches the optional Dell Soundbar.
Use to organize cables by placing them
through the slot.
Side View
Bottom View
Bottom view
Label Description
Use
1.
AC power connector To connect the monitor power cable.
2.
DP connector
Connect your computer DP cable.
3
DVI connector
To connect your computer to the monitor
using a DVI cable.
4
VGA connector
To connect your computer to the monitor
using a VGA cable.
5
USB upstream port
Connect the USB cable that came with your
monitor to the monitor and the computer.
Once this cable is connected, you can use the
USB connectors on the monitor.
About Your Monitor
11