Sparsh 540 TVL OSD Camera Series User Manual

540 tvl osd camera series

Advertisement

Quick Links

540 TVL OSD Camera Series
User Manual
V1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 540 TVL OSD Camera Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Sparsh 540 TVL OSD Camera Series

  • Page 1 540 TVL OSD Camera Series User Manual V1.0...
  • Page 2: Limitation Of Liability

    • Do not install under excess of humid conditions. TRADEMARKS This may cause the deposition of water droplets on the Sparsh logo is registered trademarks of Samriddhi lens and several other sensitive components thereby Automations Pvt. Ltd. lowering the picture quality.
  • Page 3: Installation

    INSTALLATION Image directly or strong light • Check illumination is low or not Noise in • Installation must be carried out by the authorized • Check power supply voltage is low or not Video personals only. • Check proper wire connectivity •...
  • Page 4 GENERAL • When the SETUP menu screen is displayed, select It incorporates the general parameter settings, on selecting GENERAL by using the Function Setup switch so that the General option following selection panel appears on the COLOR is visible on the screen. main screen of the monitor.
  • Page 5 • extent thereby increasing the overall picture quality of Select a desired mode using the Function Setup switch. • In order to exit the menu, use the function key to move the system. the pointer up & down and then select ‘EXIT’ to move out to main menu.
  • Page 6: Threshold Level

    ## Range provided provides an added advantage to BACKLIGHT MODE SEL highlight that area on user’s interest. BACKLIGHT MODE THRESHOLD LEVEL GAIN UNWEIGHTED LEVEL BACK TO MENU GENERAL • When the BACKLIGHT MODE SEL screen is HIGHLIGHT SUPRESS THRESHOLD LEVEL displayed, select ‘BACKLIGHT MODE’...
  • Page 7: Privacy Masking

    • Horizontal Start Position- Marking can be done UNWEIGHTED MODE on the x-axis on the screen depicting starting • When the BACKLIGHT MODE SEL screen is point of masked area, such as from where the area under privacy masking starts. displayed, select ‘UNWEIGHTED MODE’...
  • Page 8 • AE MODE PUSH- It adjusts the white Balance to a predefined value under initiated state. Toggle from high state to ON/OFF low state can be done by simply selecting ‘ON’ and ON/OFF AE SHUTTER ON/OFF vice-versa. MANUAL • MANUAL WB- It allows the user to adjust White •...
  • Page 9 • ANTI COLOR ROLLING When the MAIN MENU screen is displayed, select ‘FLICKERLESS’ by using the Function Setup switch It reduces the effect of color change during Flicker less so that it starts blinking. • control mode when enabled and vice-versa. It reduces the Select a desired mode using the Function Setup switch depending on the camera purpose.
  • Page 10: Specification

    SPECIFICATION MODEL SP-354DO SP-354DA49O SP-354CSNO SP-354CTNO Day& Night Box Camera Type Dome Varifocal Dome Box Camera Camera Image sensor 1/3 “ SONY SUPER HAD-II CCD Effective Pixels NTSC : 768 (H) x 494 (V), PAL : 752 (H) x 582 (V) Horizontal Resolution 760 H Operation Area...
  • Page 11 IR CAMERA SERIES SP-354IROXX IR Distance IR LEDs Model NO SP-354IROXX W 354- 1/3” sensor with 540 TVL Resolution 30 mtr. 36 pcs. 850 nm /Ø 5 mm IRO- Bravura IR series 40 mtr. 48 pcs. 850 mm / Ø 5 mm XX –...
  • Page 12 MODE 5 Switch Menu MENU, UP/DOWN, RIGHT/LEFT Function Control Privacy Mask ON/OFF (8 Areas) Function SHARPNESS ON/OFF I/O Connectors DC FEMALE / BNC FEMALE Operating 0°C to +50°C / 30% to 80% RH Temperature/Humidity Input Voltage 12 V DC 12 V DC 12 V DC 12 V DC 12 V DC...
  • Page 13 Samriddhi Automations Private Limited Corporate Office: F-365, Sector – 63 Noida, U.P. (India) Tel: + 91 - 120 - 4518 900 (20 Lines) Works: Plot No. : 75, Sector - 7, I.I.E., SIDCUL, Haridwar (India) Tel: + 91- 01334 - 645 011, 239 396 Service Center: A - 1 / 15, New Kondli, New Delhi.

Table of Contents