Accessories - Rockford Fosgate PUNCH 300X Installation & Operation Manual

OPERATION
Model 700X
Do the following individually for both front and rear if used.
Placing the switch in the HP position sets the amplifier to the High Pass mode, enabling frequencies
above the cut-off point to pass, adjustable between 50-21 OHz.
Placing the switch in the AP position sets the amplifier to the All Pass mode, preventing any
crossover adjustment, allowing all frequencies to pass..
Placing the switch in the LP position sets the amplifier to the Low Pass mode, enabling frequencies
below the cut-off point to pass, adjustable between 50-21 OHz.
Turn the crossover adjustment knob all the way down. With the system playing, turn the crossover
adjustment knob up slowly until the desired crossover point is achieved.
Front Crossover
Rear crossover
ACCESSORIES
Connecting PUNCH Capacitors
Maintain the power you need to your Punch Amplifier.
Connecting links
Mount your Punch Amplifiers together for space reduction and a smooth look.
See our website for other accessories to he/p you get the most out of your system.
www.rockfordfosgate.com
12