Product Diagram - Rival RGST902 Owner's Manual

GROUNDING INSTRUCTIONS (continued)
ELECTRICAL REQUIREMENTS

The electrical requirements for this microwave are a 120V, 60Hz, AC only, 20 amp.

It is recommended that a separate circuit serving only the microwave be provided.

The microwave is equipped with a 3-prong grounding plug. It must be plugged into a wall outlet properly installed
and grounded.
POWER CORD

A short power supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a
long cord.

Longer cord sets or extension cords are available and may be used if care is taken in using them.

If using a longer cord, the marked electrical rating of the cord set or extension cord should be at least as great as
the electrical marking of the microwave itself and the extension cord must be a grounded-type 3-wire cord. The
longer cord should be arranged so it will not drape over the counter or tabletop.
RADIO OR TV INTERFERENCE

Should there be any interference caused by the microwave oven to your radio or TV, check that the microwave
oven is on a different circuit, relocated the radio or TV as far away from the oven as feasible or check position and
signal of receiving antenna.

PRODUCT DIAGRAM

Door Safety Lock System
1.
2. Oven Window
3. Roller Ring
4. Turntable Shaft
5. Door Release Button
6. Control Panel
7. Spatter Shield (Do not remove)
8. Glass Tray
5