Using The Security Bar And Slot; Using The Cable Cover - Hitachi ED-A110 User Manual

Using the security bar and slot

This projector has the security bar for a
commercial anti-theft chain or wire up to 10
mm in diameter, and also the security slot for
the Kensington lock.
For details, see the manual of the security
tool.
NOTE
• These are not provided as
comprehensive theft preventions but
supplemental measures.
WARNING
exhaust vents, since the chain or wire heated by the hot exhaust gas may cause
a burn.
►Do not use the security bar or slot for the purpose of fall prevention, since
these are not designed for it.

Using the cable cover

Utilize the cable cover as the guard and blind for the connecting parts.
1.
Connect the signal cables and the
power cord to the projector first.
2.
Attach the cable cover to the
projector, uniting the interlocking
parts.
3.
Tighten the screw to fix the cable
cover.
4.
Connect the other ends of the
cables to other devices, and plug
the power cord to the power outlet.
CAUTION
prevent damage to the cables.
►Do not place the anti-theft chain or wire near the projector's
►Be careful not to pinch the cables in the cable cover, to
Security bar
Cable cover
Interlocking parts
Setting up
Security slot
Screw
Screw driver
3