Download  Print this page

Sharp DL-HB9JP8 Installation Instructions

High-bay led light.
Hide thumbs
   

Advertisement

HIgH-Bay Led LIgHt
InstaLLatIon InstrUctIons
dL-HB9JP8
Models:
dL-HB9JP4
Intended Use
The Sharp recessed High-Bay LED Light
is intended for retail, warehouse and other
indoor commercial applications.
Sharp Electronics Corporation warrants to the first consumer purchaser (the "Purchaser") that this Sharp brand LED Luminaire (the "Product"), when shipped in its original container, will be
free from defects in materials and workmanship, and agrees that it will, at its option, either repair or provide the Purchaser a replacement of the defective product or part thereof that is a new
or remanufactured equivalent at no charge to the Purchaser for parts or repair labor for the period set forth below.
Warranty Period for this Product:
The warranty period for material defects and workmanship is 1 year from date of original purchase from Sharp or its authorized reseller.
terms and conditions:
The warranty will apply only when the Product is used with products or lighting systems which are installed, operated, or maintained in accordance with each of the following:
• The National Electric Code (NEC)
• The Standards for Safety of the Underwriters Laboratories, Inc. (ETL Listed)
• The Standards of the American National Standards Institute (ANSI), and
• The specifications supplied by Sharp for the Installation, operation and maintenance of the Product.
This warranty will be void in the event the Product is (i) improperly installed, (ii) damaged, (iii) defaced, or (iv) subjected to neglect, accidental breakage or misuse, including but not limited to,
failing to operate Product in accordance with Sharp specifications. Sharp shall not be responsible for any failure of the Product which is a result of external causes; natural catastrophe; power
surges or failure; improper power supply; fault or negligence of the Purchaser or user; improper or unauthorized alteration, use, handling, or storage; operating product in ambient temperature
that exceeds ambient listing; or any cause other than a defect in the material or workmanship of the Product. Sharp reserves the right to examine all failed Products and in its sole discretion to
determine whether any Products are covered under the terms of this Limited Warranty.
This Limited Warranty does not include any Purchaser's material and labor costs required to remove, replace or ship the Product.
Limitation of Liability:
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the Purchaser. Correction of defects, in the
manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the Purchaser with respect to the Product and shall
constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects
in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental
or consequential economic, property or special damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
If any provision of this Limited Warranty, or part thereof, is held or deemed to be invalid, void or unenforceable, such holding shall not affect the validity and enforceability of the remainder
of the Limited Warranty, and such other parts, provisions or clauses of the Limited Warranty shall be deemed to be severable. T his device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.
disputes: Any claim or dispute regarding these warranties shall be governed by and construed in accordance with the laws of the State of New Jersey (US).
Questions: Please contact your local Sharp representative or Sharp Customer Service at 1-877-312-LED1 (1-877-312-5331).
Where to obtain service: Warranty service is available at a Sharp Authorized Service Center in the United States. To find the location of the nearest Sharp Authorized Service Center, call
Sharp toll free at 1-877-312-5331, e-mail Sharp at LEDsupport@sharpusa.com or visit online at www.sharpledlighting.com
How to obtain service: Call Sharp toll free at 1-877-312-5331 to obtain a Return Authorization Number and shipping instructions. After obtaining a Return Authorization Number, ship your
Product prepaid to a Sharp Authorized Service Center. Be sure it is insured and packaged securely.
Proof of Purchase will be required.
Caution – Safety StatementS
Warning - Do not handle energized luminaires. Always turn off power before
installing, removing, or inspecting.
Qualified licensed professionals should perform all installation work.
Installation must be completed in strict conformance with local building and
electrical codes.
Do not dis-assemble the luminaire.
Do not remove or attempt to operate without lens cover over LED.
Warning – Do not expose wiring to edges of metal to prevent damage.
Warning – For removal of luminaire, turn off power. Allow luminaire to cool
before handling. Reverse process of installation for removal.
Use and care
It is recommended to inspect and clean the fixture by a qualified licensed
professional every three years.
Do not wipe the luminaire with alkaline cleaning substance, gasoline, thinner,
benzin, heating oil, alcohol, or polishing powder. Do not apply insect killer (it
may damage).
Do not polish the metallic parts with cleanser or scrub brush (it may damage).
sHarP eLectronIcs corPoratIon
Led LUMInaIre 1-year LIMIted Warranty
1

Advertisement

   Related Manuals for Sharp DL-HB9JP8

   Summary of Contents for Sharp DL-HB9JP8

  • Page 1 Purchaser or user; improper or unauthorized alteration, use, handling, or storage; operating product in ambient temperature that exceeds ambient listing; or any cause other than a defect in the material or workmanship of the Product. Sharp reserves the right to examine all failed Products and in its sole discretion to determine whether any Products are covered under the terms of this Limited Warranty.
  • Page 2 THIS LUMINAIRE IS 0.75MM 20mm 20mm CABLE TIE DOUBLE NUTS WRAP A INSULATION TAPE AND APPLY LOCTITE® 242® TO ALL NUTS. KEEP DOUBLE INSULATION. TIgHTEN SECURELY. Sharp ElEctronicS corporation TINSKB166MRR1 Sharp plaza Blvd., Memphis, tn 38193 1-877-312-5331 • Email: LEDsupport@sharpusa.com 05-21-13_JM www.sharpledlighting.com...

This manual also for:

Dl-hb9jp4

Comments to this Manuals

Symbols: 0
Latest comments: