How To Configure User-Aware Access Control - ZyXEL Communications ZyWALL USG 2000 User Manual

Unified security gateway

Hide thumbs Also See for ZyWALL USG 2000:

Table of Contents

• To have all Internet access from the spoke routers to go through the VPN

tunnel, set the VPN rules in the spoke routers to use 0.0.0.0 (any) as the

remote IP address.

• Your firewall rules can still block VPN packets.

• If the USG ZyWALLs' VPN tunnels are members of a single zone, make sure it is

not set to block intra-zone traffic.

• The ZyNOS based ZyWALLs don't have user-configured policy routes so the only

way to get traffic destined for another spoke router to go through the ZyNOS

ZyWALL's VPN tunnel is to make the remote policy cover both tunnels.

• Since the USG ZyWALLs automatically handle the routing for VPN tunnels, if a

USG ZyWALL is a hub router and the local policy covers both tunnels, the

automatic routing takes care of it without needing a VPN concentrator.

• If a ZyNOS-based ZyWALL's remote network setting overlaps with its local

network settings, set ipsec swSkipOverlapIp to on to send traffic destined to

A's local network to A's local network instead of through the VPN tunnel.

7.6 How to Configure User-aware Access Control

You can configure many policies and security settings for specific users or groups

of users. This is illustrated in the following example, where you will set up the

following policies. This is a simple example that does not include priorities for

different types of traffic. See

bandwidth management.

Table 20 User-aware Access Control Example

GROUP (USER)

Finance (Leo)

Engineer (Steven) Yes

Sales (Debbie)

Guest (guest)

The users are authenticated by an external RADIUS server at 192.168.1.200.

First, set up the user accounts and user groups in the ZyWALL. Then, set up user

authentication using the RADIUS server. Finally, set up the policies in the table

The ZyWALL has its default settings.

ZyWALL USG 2000 User's Guide

Bandwidth Management on page 523

BANDWIDTH MSN

Yes (M-F, 08:30~18:00)

Chapter 7 Tutorials