Panasonic BT-LH910G Brochure & Specs page 4

Diverse 3D Camera Assist Functions
SDI1 (L)
SDI2 (R)
Conventional Rig-Type 3D Camera
When the left-eye and right-eye video signals from a 3D camera
are connected to the two SDI input terminals, the BT-LH910G
lets you check 3D images on its 2D display. The BT-LH910G is
also provided with a variety of functions to help adjust a rig-type
3D camera system. It helps to reduce preparation time for 3D
shooting and boosts image accuracy.
3D Assist Functions Supported by Various Formats
1080/60i, 1080/59.94i, 1080/50i, 1080/25PsF, 1080/24PsF,
1080/23.98PsF, 1035/60i, 1035/59.94i, 720/60p, 720/59.94p,
720/50p
• MIRROR: The Mirror function simplifies the basic adjustments
of a rig-type 3D camera system. With the left-eye and right-eye
images displayed side-by-side on the screen, the right-eye
image can be flipped in the horizontal or vertical direction.
• SHIFT: This function lets you
move only the right-eye image
horizontally or vertically in the
overlay display. It's handy for
checking angle misalignment
between the left-eye and
right-eye images.
• COMPARISON:
The Comparison function
displays half-tone markers
inside the left-eye and right-eye
images displayed side-by-side.
It lets you confirm that there are
no missing image segments at
the frame edge of only one image.
• CONVERGENCE: With the left-eye or right-eye image
displayed on the full screen, the Convergence function lets you
switch the images automatically or manually. This makes it
easier to confirm the convergence point.
• COLOR: The Color function
combines left-eye and right-eye
images and displays them in a
checkerboard pattern on a full
screen. It allows you to check
the brightness and color
variance between the two
images.
• ZOOM FOCUS: This function enlarges and displays a section
of images displayed side-by-side. It can be used to check the
variance in focus and zoom between the left-eye and right-eye
images. Focus-in-Red can also be used together with this
function.
• VERTICAL: The Vertical
function lets you closely inspect
vertical misalignment between
the left-eye and right-eye
images using an auxiliary
horizontal-line marker.
• OVERLAY: Using this
function, you can check the
width of the left-right disparity
by superimposing a vertical-line
marker (in 3% intervals) on the
overlay display or difference
image between right and left in
black-and-white display.
*The Overlay display on the BT-LH910G does not provide 3D effects even if 3D Eyewear is worn.
BT-LH910G
*Picture simulated
System Connection with Camera Recorders
Viewfinder Cable (for control signal)
AJ-HPX3100G
BNC Cable
AG-HPX370 series
BNC Cable
Camera with 3G SDI output
Camera with HDMI
output such as AVCCAM
3D camera such as AG-3DA1
Signal Format for BT-LH910G
Input Signal VIDEO VF-VIDEO VF-YP
NTSC
✓ ✓
PAL
✓ ✓
640 x 480 (59.94Hz)
640 x 480 (60Hz)
480/59.94i
480/59.94p
576/50i
576/50p
720/50p
720/59.94p
720/60p
1035/59.94i*
1
1035/60i*
2
1080/23.98PsF
1080/24PsF
1080/25PsF*
3
1080/50i
1080/59.94i
1080/60i
1080/23.98p
1080/24p
1080/25p
1080/29.97p
1080/30p
1080/50p
1080/59.94p
1080/60p
✓: Supported *1: Displayed as 1080/59.94i when input is 1035/59.94i. *2: Displayed as
1080/60i when input is 1035/60i. *3: Displayed as 1080/50i when input is 1080/25PsF.
*4: RGB444 and SDI422 (12 bit) are not supported.
Option
BT-CS910G
VF Cable
DC Power
BT-LH910G
(for SDI)
DC Power
BT-LH910G
(for 3G SDI)
DC Power
BT-LH910G
HDMI
DC Power
BT-LH910G
SDI1 (L)
SDI2 (R)
DC Power
BT-LH910G
P YP P SDI1 (3G SDI) SDI2 HDMI
B R B R
✓
✓
✓ ✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ *4 ✓
✓ *4 ✓
✓ *4 ✓
As of March, 2011