If an interior light
goes out
WARNING: Before replacing a lamp,
make sure that the corresponding fuse
is in good working condition. Use only
new and original bulbs having the
same features as the older ones for
replacement.
Front ceiling lights
To replace the bulbs:
1) Remove the ceiling light by gently
levering it out with a flat head
screwdriver at point A.
2) Replace the bulb concerned:
– timed light B (12V – 10W torpedo)
– reading light C (12V – 3W).
3) Refit the ceiling light inserting the
left-hand side first and then pushing
the right-hand side into place.
WARNING: When refitting the ceiling
light, make sure that the electric wires
are correctly arranged and do not
interfere with the edges of the ceiling
lights or its retaining tongues
A
B
C
Rear ceiling lights
To replace the bulb (12V – 5W
torpedo):
1) Remove the ceiling light by gently
levering it out with a flat head
screwdriver at point D.
2) Replace the bulb.
3) Refit the ceiling light inserting the
connector side first and then pressing
on the other side until it fits into place.
D
If an interior light goes out
6
159