Main Freeze; Split Freeze; Strobe Freeze - Hitachi 51F59 Operating Manual

Picture-in-Picture (PIP)

MAIN FREEZE

Press the PAUSE button to freeze one frame of the
picture you are currently viewing and the frozen
frame will show in the Main Picture. Press the EXIT
button to return to normal viewing. This feature is
useful for freezing a picture frame with addresses.
EXIT

SPLIT FREEZE

Press the PAUSE button to freeze the picture you
are currently viewing (only the right sub-picture will
freeze). Press the EXIT button to return to normal
viewing. Please refer to page 27 for detailed spec.
MAIN PICTURE MAIN PICTURE
EXIT

STROBE FREEZE

Press the PAUSE button to freeze three frames of
the picture you are currently viewing (only the 3
sub-pictures will freeze). Press the EXIT button to
return to normal viewing. This feature is useful for
viewing a moving picture that has many details, for
example, a close play in a sporting event or a golf
swing. Please refer to page 27 for detailed spec.
EXIT
NOTE: 1. The default FREEZE mode is the MAIN
SUB PICTURE SUB PICTURE
Note : PIP Specifications in the following pages 26 & 27.
freeze followed by the SPLIT freeze and
then the STROBE freeze. The last Freeze
mode you selected before you pressed the
EXIT button will be the one that comes up
after pressing the PAUSE button again.
2. Each freeze frame is delayed about 0.1
(1/10) second.
3. When the input is HDMI signal , the FREEZE
mode is the MAIN picture FREEZE.
25