Hitachi 50VS810 Operating Manual page 12

CableCARD Slot
This slot is for the CableCARD that will be provided by your local cable operator to gain access to chosen cable channels. The
CableCARD will allow you to tune digital and high definition cable channels. Please call your local cable operator if this service is
available before requesting a CableCARD (also known as Point of Deployment (POD) module).
Connect a coaxial cable to ANT A terminal of the Rear Panel Jacks.
Insert the CableCARD into the slot (Top of card should be facing right as shown).
If the CableCARD is properly installed or not installed, the TV will display the following respective screens.
CableCARD is installed
After the CableCARD is installed, wait until the second screen below appears. The third screen below will appear if a channel is not
authorized for viewing. Press the EXIT button to exit the second screen.
Acquiring Data.
Please wait.
Please take note of all information on the screen (you will provide this information to your cable operator). Call your cable operator
and give them the information from the card to start your cable service.
NOTES:
1. A digital cable subscription is required.
2. Antenna B will not be available when CableCARD is inserted.
3. Do not insert a PCMCIA card into the CableCARD slot.
Digital Cable
ANT A
ANT B
INPUT 2 INPUT 1
Y/ Y/
VIDEO VIDEO
MONITOR OUT INPUT 4 INPUT 3
S-VIDEO
P P
B B
P P
R R
VIDEO
(MONO) (MONO) (MONO) (MONO)
L
TV AS CENTER
AUDIO
R
AUDIO
TO HI-FI
In order to start cable service
for this device, please contact
CableCARD(tm): 123-456-789-1
Host: 123-456-789-1
Data: 123-456-789-1
UnitAddress: 123-456-789-1
Press EXIT to return
CableCARD
(Top of card faces right)
HDMI 1
OPTICAL OUT
Digital Audio
Upgrade Card
HDMI 2
Apparatus Claims of U.S. Patent Nos.
4,631,603; 4,577,216; 4,819,098;
4,907,093; and 6,381,747 licensed
for limited viewing uses only.
RS232C
1 2 3 4 5
6 7 8 9
CableCARD
is not installed
OR
your cable provider
12
REAR PANEL JACKS
Not an Authorized Channel